Changing Gear Ratios...
#1
Probably a silly question, but is it possible to change the 5th gear on me car to one of a different ratio - currently it is 20mph/1000rpm - would like something like a 23mph/1000rpm.
Any comments appreciated - preferably about the gear ratios....
Cheers
Paul
Any comments appreciated - preferably about the gear ratios....
Cheers
Paul
#2
Check the previous weeks threads in drivetrain. JohnFelstead has just done the same... but in reverse. I believe you have a .825 5th. To achieve 23mph/1000rpm you will need .738.
I stand to be corrected
I stand to be corrected
#5
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
The three available from Subaru are .814, .825, ,738.
Then there are three crownwheel & pinions to play with, 4.444, 4.11, 3.9.
If you go to http://www.vmar.com/java/gear.html
You can enter the various options, and compare in gear speeds.
Mark.
Then there are three crownwheel & pinions to play with, 4.444, 4.11, 3.9.
If you go to http://www.vmar.com/java/gear.html
You can enter the various options, and compare in gear speeds.
Mark.
#6
Former Sponsor
iTrader: (48)
It depends what ratios you have at present and to identify these the exact car model etc is required.
If you are on .738 5th then your options are diff change to 4.11 or 3.9. Not as harendous as it may at first sound and this is what I did EVENTUALLY. If you want to talk it through and learn by my mistakes and probably save money give me a ring. 07860 302020.
If you are on .738 5th then your options are diff change to 4.11 or 3.9. Not as harendous as it may at first sound and this is what I did EVENTUALLY. If you want to talk it through and learn by my mistakes and probably save money give me a ring. 07860 302020.
#7
Thanks for your input.
Hypoluxa - do you have a link/thread number for the John Felstead thread? - looked but can't find it - probably cos I'm thick!
Harvey, thanks, may contact you in the future.
Cheers
Paul
Hypoluxa - do you have a link/thread number for the John Felstead thread? - looked but can't find it - probably cos I'm thick!
Harvey, thanks, may contact you in the future.
Cheers
Paul
Trending Topics
#8
Paul
The posting was certainly in the last week or so, I can't remember the title of the thread or who started it (don't think it was John tho).
Johns car is a V5 RA V-ltd, these generally have a taller 5th than the standard RA's/Type R's. (3 out of 3 I've been in anyway). In my opinion it spoils the car.
Try mailing John, or post a thread in drivetrain
The posting was certainly in the last week or so, I can't remember the title of the thread or who started it (don't think it was John tho).
Johns car is a V5 RA V-ltd, these generally have a taller 5th than the standard RA's/Type R's. (3 out of 3 I've been in anyway). In my opinion it spoils the car.
Try mailing John, or post a thread in drivetrain
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM