Impreza terzo bottem end options
#1
Scooby Newbie
Thread Starter
Impreza terzo bottem end options
Morning guys and girls I have a new project it's a 1998 terzo the bottom end has gone.
Just working out what short blocks are interchangeable. I have been offered a 1996 wrx bottom end would this work with my original heads
Any advice would be much appreciated thanks
Just working out what short blocks are interchangeable. I have been offered a 1996 wrx bottom end would this work with my original heads
Any advice would be much appreciated thanks
#2
Scooby Regular
Better option, depending on price is a new EJ207 short block
The following users liked this post:
#3
Scooby Newbie
Thread Starter
Thanks for replying. At the moment am trying to do it cheap as possible. Someone local is selling a 1996 wrx engine, am thinking is it possible to use the short block and fit my heads to it. Need to work out what head gasket I would need
#4
Scooby Regular
How much is it costing you. But back to your original question I'm not sure but the guys on here will know
The following users liked this post:
#6
Scooby Regular
depending on the exact age of the WRX engine / car it was removed from then it may have the earlier style hydraulic heads or it may be the first of the solid shim type set-up.......
does it still have the inlet manifold on??
the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours
does it still have the inlet manifold on??
the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours
#7
Scooby Newbie
Thread Starter
depending on the exact age of the WRX engine / car it was removed from then it may have the earlier style hydraulic heads or it may be the first of the solid shim type set-up.......
does it still have the inlet manifold on??
the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours
does it still have the inlet manifold on??
the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours
Trending Topics
The following users liked this post:
#9
Scooby Newbie
Thread Starter
Thanks for the reply. I am waiting on message back from the seller. Will let you know soon as he replies. Will hunt around for a head gasket 👍🏽
#12
Scooby Regular
Give Alyn @ AS Performance a call. Thats who it is.
The following users liked this post:
#13
Scooby Newbie
Thread Starter
Nice one will give them a call 👍🏽
Just got a reply from the seller it says cam16vavle on the rocker covers.
Made a start stripping the engine down, for some reason it has x2 knock sensor fitted but only 1 wire there what connects
Just got a reply from the seller it says cam16vavle on the rocker covers.
Made a start stripping the engine down, for some reason it has x2 knock sensor fitted but only 1 wire there what connects
Thread
Thread Starter
Forum
Replies
Last Post
oxfordsubaru
Subaru Parts
0
27 August 2018 08:02 PM