Impreza terzo bottem end options
Morning guys and girls I have a new project it's a 1998 terzo the bottom end has gone.
Just working out what short blocks are interchangeable. I have been offered a 1996 wrx bottom end would this work with my original heads Any advice would be much appreciated thanks https://cimg6.ibsrv.net/gimg/www.sco...6ab2f55285.jpg |
Better option, depending on price is a new EJ207 short block
|
Thanks for replying. At the moment am trying to do it cheap as possible. Someone local is selling a 1996 wrx engine, am thinking is it possible to use the short block and fit my heads to it. Need to work out what head gasket I would need
|
How much is it costing you. But back to your original question I'm not sure but the guys on here will know :thumb:
|
The lads wanting £400 for the engine. Nice one last thing I want to do is buy it and there not compatible 👍🏽
|
depending on the exact age of the WRX engine / car it was removed from then it may have the earlier style hydraulic heads or it may be the first of the solid shim type set-up.......
does it still have the inlet manifold on?? the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours |
Originally Posted by stockcar
(Post 12121646)
depending on the exact age of the WRX engine / car it was removed from then it may have the earlier style hydraulic heads or it may be the first of the solid shim type set-up.......
does it still have the inlet manifold on?? the 96 and older engine you would want to swap your Terzo heads to, but the later 97-98 engine has basically the same as yours https://cimg7.ibsrv.net/gimg/www.sco...abff4edc60.jpg |
they both use the same circa 1.5mm head gasket set..........
does it have plain cam covers or are they logo'd with "4cam 16valve" ?? |
Originally Posted by stockcar
(Post 12121652)
they both use the same circa 1.5mm head gasket set..........
does it have plain cam covers or are they logo'd with "4cam 16valve" ?? |
we tend to have them on the shelf........
|
Originally Posted by stockcar
(Post 12121665)
we tend to have them on the shelf........
|
Give Alyn @ AS Performance a call. Thats who it is.
|
Nice one will give them a call 👍🏽
Just got a reply from the seller it says cam16vavle on the rocker covers. Made a start stripping the engine down, for some reason it has x2 knock sensor fitted but only 1 wire there what connects https://cimg8.ibsrv.net/gimg/www.sco...21a4d16060.jpg https://cimg7.ibsrv.net/gimg/www.sco...3ea04bc596.jpg |
the lower one is the original, possibly it was faulty and someone simply took the easy option of adding another??
|
All times are GMT +1. The time now is 07:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands