Rotated set up question
02 May 2020, 08:29 PM
#1
Rotated set up question
Just browsing through rcm's website and I notice they now do a rotated set-up with screamer pipe, it's around £300 cheaper. Is there an advantage to having a screamer pipe instead of sending the wastegate through the downpipe? Increased spool perhaps?
Also when going rotated do you have to rotate the inlet manifold or have parallel fuel rails?
https://rogerclarkmotorsport.co.uk/s...-turbochargers
Also when going rotated do you have to rotate the inlet manifold or have parallel fuel rails?
https://rogerclarkmotorsport.co.uk/s...-turbochargers
03 May 2020, 07:15 AM
#2
You don't have to rotate the manifold but if you can afford to, there would be less pipe work ,which can only be good. I modified my existing perrin fmic pipe work to fit.
I think fuel rails would be a must , I have the rcm ones .
I have that rcm rotated kit , its actually made by Invidia and I can confirm its monstrously loud when you get up to my 14psi waste gate opening point , im thinking it will eventually get fed back into the exhaust …….once the novelty wares off .
I think fuel rails would be a must , I have the rcm ones .
I have that rcm rotated kit , its actually made by Invidia and I can confirm its monstrously loud when you get up to my 14psi waste gate opening point , im thinking it will eventually get fed back into the exhaust …….once the novelty wares off .
Last edited by lockheed; 03 May 2020 at 07:19 AM.
The following users liked this post:
03 May 2020, 07:34 AM
#3
You don't have to rotate the manifold but if you can afford to, there would be less pipe work ,which can only be good. I modified my existing perrin fmic pipe work to fit.
I think fuel rails would be a must , I have the rcm ones .
I have that rcm rotated kit , its actually made by Invidia and I can confirm its monstrously loud when you get up to my 14psi waste gate opening point , im thinking it will eventually get fed back into the exhaust …….once the novelty wares off .
I think fuel rails would be a must , I have the rcm ones .
I have that rcm rotated kit , its actually made by Invidia and I can confirm its monstrously loud when you get up to my 14psi waste gate opening point , im thinking it will eventually get fed back into the exhaust …….once the novelty wares off .
Is there an advantage to it compared to the original rcm one?
The following users liked this post:
03 May 2020, 07:49 AM
#4
The Invidia one sounds like climbing Spit Fire , im really not joking some of the looks I get from cyclists and old women . In my younger days I would be stopping and having a conversation about the difference between noise and speed .
Last edited by lockheed; 03 May 2020 at 07:54 AM.
The following users liked this post:
03 May 2020, 07:53 AM
#5
I couldn't comment on the Proper RCM one as ive got no experience with that but its a very pretty looking thing and there could be a lead time as I was told they make them to order.
The Invidia one sounds like climbing Spit Fire , im really not joking some of the looks I get from cyclists and old women . In my younger days I would be stopping and having a conversation about the difference between noise and speed .
The Invidia one sounds like climbing Spit Fire , im really not joking some of the looks I get from cyclists and old women . In my younger days I would be stopping and having a conversation about the difference between noise and speed .
The following users liked this post:
03 May 2020, 05:31 PM
#9
Scooby Regular
The following 2 users liked this post by Don Clark:
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post