power steering whine ? 98 wrx sti ver4
#1
Scooby Regular
Thread Starter
Join Date: Mar 2016
Location: Norfolk
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
power steering whine ? 98 wrx sti ver4
When I at a stand still and give the engine a Rev there is a whine.. There is the same whine when I turn at low speeds also.
Is this just simply the power steering belt needing to be replaced, she's going in v.soon to have cambelt changed so thinking I should just get all other belts changed at same time ?
Is this a problem or is it just a worn belt?
Could it be the power steering pump on its way out?
Any advice would be much appreciated thanks
Is this just simply the power steering belt needing to be replaced, she's going in v.soon to have cambelt changed so thinking I should just get all other belts changed at same time ?
Is this a problem or is it just a worn belt?
Could it be the power steering pump on its way out?
Any advice would be much appreciated thanks
#2
Scooby Regular
iTrader: (1)
When I at a stand still and give the engine a Rev there is a whine.. There is the same whine when I turn at low speeds also.
Is this just simply the power steering belt needing to be replaced, she's going in v.soon to have cambelt changed so thinking I should just get all other belts changed at same time ?
Is this a problem or is it just a worn belt?
Could it be the power steering pump on its way out?
Any advice would be much appreciated thanks
Is this just simply the power steering belt needing to be replaced, she's going in v.soon to have cambelt changed so thinking I should just get all other belts changed at same time ?
Is this a problem or is it just a worn belt?
Could it be the power steering pump on its way out?
Any advice would be much appreciated thanks
#3
Scooby Regular
Thread Starter
Join Date: Mar 2016
Location: Norfolk
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#4
Scooby Regular
Thread Starter
Join Date: Mar 2016
Location: Norfolk
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
So I've checked it and there is 2 little rectangles on the dip stick one for cold one for hot and it's half way up the one for cold.
Obviously I measured this cold.
It seems like to top this up to the top of the cold line it would take about 10ml.
Am I ok where it is?
Thanks
Obviously I measured this cold.
It seems like to top this up to the top of the cold line it would take about 10ml.
Am I ok where it is?
Thanks
#5
Scooby Regular
Thread Starter
Join Date: Mar 2016
Location: Norfolk
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Fluid level is fine !! also had the belt changed.
any idea what else this could be - have read about an O ring for the top hose or something ?
any help would be lovely thanks.
any idea what else this could be - have read about an O ring for the top hose or something ?
any help would be lovely thanks.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post