Hi Guys


Got my first Scooby bug eye


Had several codes come up, one was high voltage p0132 and low voltage p0131 for the lambda sensor - replaced it with a denso, reset the ecu and its still throwing the same codes up - can anyone help?


The other codes are p0500, p1518.


The car drives fine but is hesitant under load.


Does anyone have an ideas?


Many thanks

 

hi mate have you just bought the car which has started throwing up the codes or have there been any other sympoms with the codes?

also are there any mods??

 

just bought the car it started hesitant under load and on boost so plug her in and the codes roll on in lol its got a red inlet(sti maybe)and its only got the one cat on the down pipe that's it.i have tried new plugs fuel filter(running v power)and new denso o2 sensor but still codes and hesitant

 

just bought a bugeye wrx it started hesitant under load and on boost so plug her in and the codes roll on in lol p0131and p0132 its got a red inlet(sti maybe)and its only got the one cat on the down pipe that's it.i have tried new plugs fuel filter(running v power)and new denso o2 sensor reset ecu but still codes and hesitant so where do I look now lol?

 

I think bank#1 O2 sensor is in the header manifold down by the turbo,have had a look for it there?

 

I know where it is bud what would people look at next maf/coilpack I have also looked for airleaks too

 

Ok I thought there was two O2 sensors and an EGT on the bug?

 

yes there are 2 o2 sensor and an egt the front o2 sensor is in header next to drivers side front wheel the egt is in up pipe and the back o2 sensor is in mid of car .I just don't no why I have codes for the front o2 sensor when I have replace it and reset ecu still

 

Any help out there

1 - only start one thread at a time about the same problem

2 - if you know where the 02 sensor is, I would think you would know where the full stop and comma keys are on a keyboard

3 - don't be abrupt or ar5ey when someone is trying to help you

HTH

 

1 -fair play
2 don't care about full stop and comma keys never been my thing.
3 didn't mean to come across like that

 

Is it a genuine denso sensor?

 

I'm not the most knowledgeable bloke with stuff like this but, I know some on here would read your problem and have a good idea of what's wrong, but they would read your replies and not bother helping you.

Hope you get it sorted

 

ok thanks for the heads up on this. Yes it a denso

 

can you take some logs? might help identify the problem.

 

Im wondering if the prev owner added a few bits before selling with the idea of mapping it but sold it in a hurry.... Ive had similar codes but was due to the intercooler the throttle body silicone pipe splitting,this threw the sensors all off and made car hesitant and loss of boost