Hesitant Under Load, codes and other stuff!
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: hants
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hesitant Under Load, codes and other stuff!
Hi Guys
Got my first Scooby bug eye
Had several codes come up, one was high voltage p0132 and low voltage p0131 for the lambda sensor - replaced it with a denso, reset the ecu and its still throwing the same codes up - can anyone help?
The other codes are p0500, p1518.
The car drives fine but is hesitant under load.
Does anyone have an ideas?
Many thanks
Got my first Scooby bug eye
Had several codes come up, one was high voltage p0132 and low voltage p0131 for the lambda sensor - replaced it with a denso, reset the ecu and its still throwing the same codes up - can anyone help?
The other codes are p0500, p1518.
The car drives fine but is hesitant under load.
Does anyone have an ideas?
Many thanks
#3
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: hants
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
just bought the car it started hesitant under load and on boost so plug her in and the codes roll on in lol its got a red inlet(sti maybe)and its only got the one cat on the down pipe that's it.i have tried new plugs fuel filter(running v power)and new denso o2 sensor but still codes and hesitant
#4
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: hants
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
any help out there
just bought a bugeye wrx it started hesitant under load and on boost so plug her in and the codes roll on in lol p0131and p0132 its got a red inlet(sti maybe)and its only got the one cat on the down pipe that's it.i have tried new plugs fuel filter(running v power)and new denso o2 sensor reset ecu but still codes and hesitant so where do I look now lol?
Trending Topics
#8
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: hants
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
yes there are 2 o2 sensor and an egt the front o2 sensor is in header next to drivers side front wheel the egt is in up pipe and the back o2 sensor is in mid of car .I just don't no why I have codes for the front o2 sensor when I have replace it and reset ecu still
#15
Scooby Regular
iTrader: (2)
Join Date: Nov 2014
Location: hampshire
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Im wondering if the prev owner added a few bits before selling with the idea of mapping it but sold it in a hurry.... Ive had similar codes but was due to the intercooler the throttle body silicone pipe splitting,this threw the sensors all off and made car hesitant and loss of boost
Thread
Thread Starter
Forum
Replies
Last Post
legb4rsk
Non Scooby Related
20
02 December 2015 02:22 PM