RCM Catch Tank GC8
29 August 2015, 10:00 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2014
Location: Essex
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RCM Catch Tank GC8
Evening chaps,
Fitting the RCM catch tank and just checking the fitment
It's got 3 smaller inlets: both heads and crank case.
It has the return to sump at the bottom, all quite easy
The bit I'm confused with is there is a larger inlet the opposite end to the smaller ones, where do this connection to? VAC under the throttle body?
http://www.advancedautomotives.com/r...-v6-1102-p.asp
This is the kit I'm fitting, the inlet I'm talking about is directly above the threaded return to sump fitting
Fitting the RCM catch tank and just checking the fitment
It's got 3 smaller inlets: both heads and crank case.
It has the return to sump at the bottom, all quite easy
The bit I'm confused with is there is a larger inlet the opposite end to the smaller ones, where do this connection to? VAC under the throttle body?
http://www.advancedautomotives.com/r...-v6-1102-p.asp
This is the kit I'm fitting, the inlet I'm talking about is directly above the threaded return to sump fitting
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM