Kingaz89

Hi all. I have a turbo 2000.
A few years back it had decat, 2.5inch straight through and a panel filter. The ecu was remapped by Ecutek at a price of £600!!!
Since then, It has had yellow injectors, bigger top mount, td05 20g and a walbro fuel pump. It runs nice and is quite quick. Boost is 1.4 bar but sometimes drops down to 1bar at higher revs. My question is; what's the best route to go down now? Will I need another map to accommodate the mods? If so am I best getting another Ecutek map?
Any help would be appreciated

Cheers

360ste

iTrader: (1)

YES you will need a map. The injectors are a different size, the turbo has different characteristics. As you have already paid for the licence the next map will be cheaper.

BrownPantsRacing

iTrader: (6)

An Ecutek adjustment will not cost another £600. Just contact your nearest ecutek dealer.

Please tell me you are not driving your car lots or hard on those mods without a map tweak?

Kingaz89

Yeah wasn't aware it would damage anything. Will get in touch with an Ecutek dealer ASAP

BrownPantsRacing

iTrader: (6)

Drive it gently and off boost until you get it remapped again.

Kingaz89

I will do, these cars not like the old Rs turbos and that? Used to just whack a bigger turbo on and have done anyone know if scoobyclinic deal with Ecutek and how much a map tweak will be

blackvenom

Suprised with injectors and a turbo it doesn't run like a pig.

Kingaz89

Runs sweet tbf, just not super duper quick and the boost drops off to 1 bar. Pulls really nice though. Will be driving sensible from now though