Engine loom grey & brown plug pin out request
19 April 2020, 12:19 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: Chester
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Engine loom grey & brown plug pin out request
Hi all,
I’m looking for the pin out diagram for the grey and brown plugs on the engine loom, mainly for a 2002 wrx.
Can anyone point me in the right direction please?
cheers
nige
I’m looking for the pin out diagram for the grey and brown plugs on the engine loom, mainly for a 2002 wrx.
Can anyone point me in the right direction please?
cheers
nige
19 April 2020, 02:18 PM
#2
Scooby Regular
Unfortunately the wiring diagrams do not include complete pin outs, only those connected to the individual systems that use each connector.
Relative section of Engine Electrical System (Engine Loom connectors are marked E* along with their mating Bulkhead loom connector B*)
E1/B20 being Light Gray; E3/B22 being Brown; E2/B21 being Black for turbo model.
See engine loom.pdf attached
The vacant pins on connector E1/B20 are used for AVCS cam position sensors on the STI model.
Relative section of Engine Electrical System (Engine Loom connectors are marked E* along with their mating Bulkhead loom connector B*)
E1/B20 being Light Gray; E3/B22 being Brown; E2/B21 being Black for turbo model.
See engine loom.pdf attached
The vacant pins on connector E1/B20 are used for AVCS cam position sensors on the STI model.
19 April 2020, 04:20 PM
#3
Scooby Regular
Thread Starter
Join Date: Oct 2012
Location: Chester
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately the wiring diagrams do not include complete pin outs, only those connected to the individual systems that use each connector.
Relative section of Engine Electrical System (Engine Loom connectors are marked E* along with their mating Bulkhead loom connector B*)
E1/B20 being Light Gray; E3/B22 being Brown; E2/B21 being Black for turbo model.
See engine loom.pdf attached
The vacant pins on connector E1/B20 are used for AVCS cam position sensors on the STI model.
Relative section of Engine Electrical System (Engine Loom connectors are marked E* along with their mating Bulkhead loom connector B*)
E1/B20 being Light Gray; E3/B22 being Brown; E2/B21 being Black for turbo model.
See engine loom.pdf attached
The vacant pins on connector E1/B20 are used for AVCS cam position sensors on the STI model.
Thanks Don. Looks like I will get what I want from the attachment.
Nige
Thread
Thread Starter
Forum
Replies
Last Post