Dawes and AFM has arrived
#1
All,
My Dawes and AFM has arrived this morning!!!! Well chuffed, so off to Edinburgh as soon as I can for fitting
Only thing I would say is the AFM is labelled WRX and not Turbo, does that matter ?? Sideways has the same, as me!!
I must say that I was well impressed with the feedback that Jamie gave me, apart from a couple of emails that I missed due to email dramas, my fault not Jamies. Sorry Jamie for kicking off.
Cheers Phill C
My Dawes and AFM has arrived this morning!!!! Well chuffed, so off to Edinburgh as soon as I can for fitting
Only thing I would say is the AFM is labelled WRX and not Turbo, does that matter ?? Sideways has the same, as me!!
I must say that I was well impressed with the feedback that Jamie gave me, apart from a couple of emails that I missed due to email dramas, my fault not Jamies. Sorry Jamie for kicking off.
Cheers Phill C
#2
All,
Looking on the web site I think I have the correct one!!! Really hope so
Cheers Phill C
PS John Banks can you TTT the thread that answers all our questions as Im sure loads of people will be asking you all the same stuff again
Looking on the web site I think I have the correct one!!! Really hope so
Cheers Phill C
PS John Banks can you TTT the thread that answers all our questions as Im sure loads of people will be asking you all the same stuff again
#3
I think Crail is on the 10th and a SIDC Knockhill track day,is on the 17th for the ultimate tests .unfortunately I doubt I'll be at either of them,unless the weather is bad .
#6
while you are there,why not fit the AFM,if it's the same as the Lambdalink you will do it in no time.Blue connector B136 pin 21 is the signal and either pin 8and9 can be used for the switched power supply,details on www.mrtrally.com.au/performance/docs/WRX-V5.pdf .I soldered my wires but to be honest I think cutting and crimping with proper crimping pliers is easier.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post