Sti 8 intercooler fitment
#1
Scooby Regular
Thread Starter
Join Date: Jul 2004
Location: 352bhp at 1.3 bar heaven
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Sti 8 intercooler fitment
Chaps,
Will an sti 8 intercooler bolt straight on to my MY99 sti 6 wagon?
If not, what will I need to do?
Dave
Will an sti 8 intercooler bolt straight on to my MY99 sti 6 wagon?
If not, what will I need to do?
Dave
#2
Scooby Regular
iTrader: (8)
its not a direct fit, you will need to cut about 20mm off the clutch resevoir, you then need the left hand STI intercooler bracket and you will have to do some seriuos hammering and bending to your righthand bracket, then you will need a quality samco Y piece to fit on to your car as the sti one is too small, its a tight fit to get it in but once in its ok.
#3
Stevebt, with regard to the samcos, what did you ask for exactly when you bought yours, and what did you do for a d/v hose? Right in the middle of trying to fit one of these. Cheers in advance. Also, d'you have any probs with the back of the i/c hitting the bulkhead?
Last edited by micared; 07 December 2004 at 09:32 PM.
#4
Scooby Regular
iTrader: (8)
Originally Posted by micared
Stevebt, with regard to the samcos, what did you ask for exactly when you bought yours, and what did you do for a d/v hose? Right in the middle of trying to fit one of these. Cheers in advance. Also, d'you have any probs with the back of the i/c hitting the bulkhead?
#7
Take off the reservoir itself and cut 20mm off as steve says, hacksaw's as good as anything. Re-attach with jubilee clip. Alternatively, use the sti8 master cylinder, which has the reservoir mounted differently, allowing the i/c to go straight on without the need to hack it about.
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Jul 2004
Location: 352bhp at 1.3 bar heaven
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Steve,
Cheers for the info. Where can i get a samco Y piece for an sti 8? Done a quick search but can't find a stockist.
Dave
Cheers for the info. Where can i get a samco Y piece for an sti 8? Done a quick search but can't find a stockist.
Dave
Originally Posted by stevebt
its not a direct fit, you will need to cut about 20mm off the clutch resevoir, you then need the left hand STI intercooler bracket and you will have to do some seriuos hammering and bending to your righthand bracket, then you will need a quality samco Y piece to fit on to your car as the sti one is too small, its a tight fit to get it in but once in its ok.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM