What BHP/TORQUE from Tek3, Exhaust on UK STi 04/05?
27 November 2004, 12:01 PM
#1
What BHP/TORQUE from Tek3, Exhaust on UK STi 04/05?
Anybody that has had a :
TEK3
Full de-cat exhaust from turbo
Improved air filter
Uprated Fuel pump
On an UK Sti MY03/04/05 and had it performance measured (rolling road etc), can you please post your results here.
Regards,
Shaun.
TEK3
Full de-cat exhaust from turbo
Improved air filter
Uprated Fuel pump
On an UK Sti MY03/04/05 and had it performance measured (rolling road etc), can you please post your results here.
Regards,
Shaun.
27 November 2004, 01:45 PM
#3
Scooby Regular
Join Date: Jan 1999
Location: Gone for Good
Posts: 13,628
Likes: 0
Received 0 Likes
on
0 Posts
4th Gear Delta Dash Test on MY02 STi with fuel reg, uprated pump, full H&S system, green panel filter & ECU TEK 3.
337bhp - 317ft/lb.
Will try it in 5th one day if I can find a private road
Obviously as this was delta dash can't be 100% on these results, but gives you an idea
337bhp - 317ft/lb.
Will try it in 5th one day if I can find a private road
Obviously as this was delta dash can't be 100% on these results, but gives you an idea
28 November 2004, 02:48 PM
#5
Tony,
You can if you wish, but that will just annoy me off as it has to be a UK car!
By the lack of responses I can only assume (thanks for the feedback so far though) that not many 03/04/05 owners are modding cars other than PPP??
Regards,
Shaun.
You can if you wish, but that will just annoy me off as it has to be a UK car!
By the lack of responses I can only assume (thanks for the feedback so far though) that not many 03/04/05 owners are modding cars other than PPP??
Regards,
Shaun.
28 November 2004, 03:18 PM
#6
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Shaun,
311bhp and 331lbs of torque, standard jdm map with STi panel filter and back box (H&S)
There was an MY04 Sti at well lane running a td05/06 which ran 376bhp/350lbs of torque though last week, but i prefer the JDM 555 (MY04) car ive seen that runs 360bhp/380lbs of torque with full decat/remap
Tony
311bhp and 331lbs of torque, standard jdm map with STi panel filter and back box (H&S)
There was an MY04 Sti at well lane running a td05/06 which ran 376bhp/350lbs of torque though last week, but i prefer the JDM 555 (MY04) car ive seen that runs 360bhp/380lbs of torque with full decat/remap
Tony
29 November 2004, 10:50 AM
#7
Scooby Regular
Join Date: Jul 2000
Location: Dull White BMW
Posts: 5,052
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by webmaster
By the lack of responses I can only assume (thanks for the feedback so far though) that not many 03/04/05 owners are modding cars other than PPP??
Steve
Trending Topics
29 November 2004, 11:02 AM
#8
Originally Posted by Steve Sherwen
The PPP seems to be quite a good package. Why risk a 3 year warranty for marginal real world gains from an aftermarket tunner?
Steve
Steve
Regards,
Shaun.
29 November 2004, 11:10 AM
#9
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps there would be more response if you asked the MY01/2 STI owners that are out of warranty?
Is there any difference engine wise in these models?
Is there any difference engine wise in these models?
29 November 2004, 01:58 PM
#11
Scooby Regular
Join Date: Jun 2002
Posts: 3,034
Likes: 0
Received 0 Likes
on
0 Posts
i have an 03sti exppp tsl triple 3 got 310/319 at prosport with remap/bb/centre section/green filter have not gone back for repeat as yet but it scored 20bhp more at dastek with 333 compared to remap etc
martin
ps drives much smoother and pulls to the redline much better than ppp
martin
ps drives much smoother and pulls to the redline much better than ppp
29 November 2004, 03:16 PM
#12
Scooby Regular
Join Date: Feb 2003
Location: CHIPP'N HAM
Posts: 3,931
Likes: 0
Received 0 Likes
on
0 Posts
2003STI Eu
H & S 3" to 2.5" Downpipe
Standard Centre section
Prodrive Back Box
STI Panel Filter
Ecutek'd by Powerstation 283bhp 280 ft/lb
Now remapped by Bob Rawle
Not had it RR'd yet, but feels quicker at 4k+ rpm
H & S 3" to 2.5" Downpipe
Standard Centre section
Prodrive Back Box
STI Panel Filter
Ecutek'd by Powerstation 283bhp 280 ft/lb
Now remapped by Bob Rawle
Not had it RR'd yet, but feels quicker at 4k+ rpm
29 November 2004, 05:06 PM
#13
Scooby Regular
Join Date: May 2001
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scooby L
2003STI Eu
H & S 3" to 2.5" Downpipe
Standard Centre section
Prodrive Back Box
STI Panel Filter
Ecutek'd by Powerstation 283bhp 280 ft/lb
Now remapped by Bob Rawle
Not had it RR'd yet, but feels quicker at 4k+ rpm
H & S 3" to 2.5" Downpipe
Standard Centre section
Prodrive Back Box
STI Panel Filter
Ecutek'd by Powerstation 283bhp 280 ft/lb
Now remapped by Bob Rawle
Not had it RR'd yet, but feels quicker at 4k+ rpm
29 November 2004, 05:10 PM
#14
Scooby Regular
Join Date: May 2001
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by webmaster
Anybody that has had a :
TEK3
Full de-cat exhaust from turbo
Improved air filter
Uprated Fuel pump
On an UK Sti MY03/04/05 and had it performance measured (rolling road etc), can you please post your results here.
Regards,
Shaun.
TEK3
Full de-cat exhaust from turbo
Improved air filter
Uprated Fuel pump
On an UK Sti MY03/04/05 and had it performance measured (rolling road etc), can you please post your results here.
Regards,
Shaun.
What Insurance Co will cover full de-cat - V&R wont take any mods at all now
I would love to try Bobs re-map with full de-cat, but no idea who would insure me...
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM