To all Magnex midsection owners...
#2
Because it is still straight through, but has a resonator in the pipe that stops some of the boomy noise - still sounds good though. Also because its removeable when I sell the car and the cat can be put back on, where Scoobysport cut the cat out and replace it with a piece of pipe. Bought mine from Falkland, got 10% discount and it arrived the next day. Very easy fit with instructions and nuts/bolts etc, not that I fitted mine but the guy who did said it took him 10 mins, he was impressed. I have a MY00 by the way.
Regards
Jason
Regards
Jason
#3
Or on the other hand the Road Runner (Nottingham) supplied Magnex mid section don't have the res and the sound produced differs from the SS mid section, yes still loud.
Also the SS is a modification of your standard pipe.Magnex is a replacement.
...Ian (Magnex straight through no res box and Happy)
Also the SS is a modification of your standard pipe.Magnex is a replacement.
...Ian (Magnex straight through no res box and Happy)
#4
Magnex midsection with resonator. Chosen because i've had magnex before and have absolute faith in their quality and performance. (No disrespect Pete and Co). Also can replace centre CAT if required.
#5
same reasons as Lord Lucan above
The magnex nuts dont fit correctly
Just buy one and stop pissing about Andrei
[This message has been edited by sunilp (edited 05 August 2000).]
The magnex nuts dont fit correctly
Just buy one and stop pissing about Andrei
[This message has been edited by sunilp (edited 05 August 2000).]
#6
Scooby Regular
Join Date: Sep 1999
Location: In the garage or in bed
Posts: 7,278
Likes: 0
Received 0 Likes
on
0 Posts
I have the 3.5" Round as well as the decat pipe with resonator box looks and sound the dogs nuts pics on my web site
The best place to buy it from,is as most people will say is Roadrunners
Ps. I have a friend that has a Stainless steel system He thinks it could be a Magnex or Prodrive system he is not sure it's 3.5" bore and 4.5 round tail pipe and straight through decat pipe wants approx £180 as new
Huxley
The best place to buy it from,is as most people will say is Roadrunners
Ps. I have a friend that has a Stainless steel system He thinks it could be a Magnex or Prodrive system he is not sure it's 3.5" bore and 4.5 round tail pipe and straight through decat pipe wants approx £180 as new
Huxley
#7
I chose neither and went for a scorpion because..
1) Trully straight through. just a 2.5" pipe, not cat, no box/silencer/resonator...
2) Cheaper as only cost £69 for new pipe (means still got old pipe 'just in case')
3) instant supply, both magnex and SS were quoting 3 weeks+ at the time.
Fitting took 20 mins (and cost £10), good performance increase , great audible increase , great flames (although downpipe is biggest factor in that), no 'booming', no downsides
1) Trully straight through. just a 2.5" pipe, not cat, no box/silencer/resonator...
2) Cheaper as only cost £69 for new pipe (means still got old pipe 'just in case')
3) instant supply, both magnex and SS were quoting 3 weeks+ at the time.
Fitting took 20 mins (and cost £10), good performance increase , great audible increase , great flames (although downpipe is biggest factor in that), no 'booming', no downsides
Trending Topics
#8
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by sunilp:
Just buy one and stop pissing about Andrei
B]<HR></BLOCKQUOTE>
OK smart Rse I'm just trying to figure out WHICH ONE!!!
A few people mentioned the difference in sound between Magenex and SS. What is the difference?
Cheers for the info guys!
Andrei
[This message has been edited by Subarussian (edited 05 August 2000).]
Just buy one and stop pissing about Andrei
B]<HR></BLOCKQUOTE>
OK smart Rse I'm just trying to figure out WHICH ONE!!!
A few people mentioned the difference in sound between Magenex and SS. What is the difference?
Cheers for the info guys!
Andrei
[This message has been edited by Subarussian (edited 05 August 2000).]
Thread
Thread Starter
Forum
Replies
Last Post
Scott J Davies
ScoobyNet General
22
12 November 2000 09:48 PM