DIY FMIC
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: RIP Moneys Scoob 440bhp/470lbsft 31-07-08
Posts: 6,005
Likes: 0
Received 0 Likes
on
0 Posts
Its a pain in the **** danny basically. Apparently by the time you do all the piping etc, it works out about £500 for a fmic. So you save about £700 but its a lot of work.
I know a company that will start making cutom FMICs. They are in the process of testing the first one i believe and if it pulls off, should be about £600 - £650.
Core is meant to be as good as the HKS one
Ive told 3 people about it and 3 people want it. Could be a group buy
I know a company that will start making cutom FMICs. They are in the process of testing the first one i believe and if it pulls off, should be about £600 - £650.
Core is meant to be as good as the HKS one
Ive told 3 people about it and 3 people want it. Could be a group buy
#2
What about using some second hand APS of HKS piping to meet up with it. Solves the hassle of making the pipes, you would just need to make up adapters for the pipes to fit on the IC.
#3
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Bigger isn't always better. "Core" design is VERY important though. Cores vary in price not only depending on size, but design. I've seen cores of a similar size, ranging from £150, to over £1000.
"Secondhand" pipe work ! well I guess you find the odd set from a damaged car.
Mark.
"Secondhand" pipe work ! well I guess you find the odd set from a damaged car.
Mark.
#6
Scooby Regular
Join Date: Jan 2002
Location: Chairman of Scoobycity
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
The pipe work does'nt worry me at all. I used to be a welder/fabricator plus I have a mate who makes custom exhausts.
Mybe if I could find the right IC I'll open shop
Mybe if I could find the right IC I'll open shop
#7
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
you can find the right IC but you wont find it at the right price..
I made my own intercooler but I didnt need to point that out did I?
David
I made my own intercooler but I didnt need to point that out did I?
David
Trending Topics
#15
Scooby Regular
Join Date: Jan 2002
Location: Chairman of Scoobycity
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I've been toying with the idea of making my own FMIC using an intercooler from one of the big 4x4's (Shogun, range rover, etc). I can fabricate the pipework using alloy or stainless easy enough but wanted to know if there's anything I should know about the intercooler.
Am i right to assume the bigger the better?
Is there something I'm forgetting as I can't understand why more people don't do it and save themselves a grand?
www.scoobycity.co.uk
[Edited by DannyBoyTurbo - 8/12/2003 7:48:25 AM]
Am i right to assume the bigger the better?
Is there something I'm forgetting as I can't understand why more people don't do it and save themselves a grand?
www.scoobycity.co.uk
[Edited by DannyBoyTurbo - 8/12/2003 7:48:25 AM]
Thread
Thread Starter
Forum
Replies
Last Post