pban

Can someone give me idea where in the engine bay the engine mounts are?

Paul

pban

No one knows?

MorayMackenzie

Engine mounts: one each side of block, between block and subframe. One bolt on each side to hold engine mount to subframe.


[Edited by MorayMackenzie - 4/14/2003 4:33:41 PM]

pban

Moray

Thanks

Paul

dowser

Do the gearbox mount at the same time

Richard

Danny Fisher

Dont forget the one UNDER the OE intercooler. Although this is not a mount, it does need to be removed to take an engine out.

Dan

MorayMackenzie

Thats the Pitch stopper bar.

Crusty

Anyone notice vastly increased engine vibrations after fitting engine and or 'box mounts ? And what brands were used ?

Cheers, Mark.

beryllium

hardeness(sti) gearbox and pitchstop mounts fitted and tried this evening - engine still hot - no vibrations,all is ok

Crusty

Are your box mounts similar to mine http://groups.msn.com/IMPREZAWRXPhotosite/mywrxpix.msnw?action=ShowPhoto&PhotoID=693

Or do they have move 'voids' (gaps) in the rubber ? Cos my car vibrates like crazy !! Do you have a pic of the pitch bush ??

Cheers, Mark.

vulnax999

iTrader: (7)

Any one got tips on fitting engine mounbts to a turbo scooby?

Done the gearbox one - removed a lot of slop and seems smoother now ( STi mounts, no voids, harder rubber ). No worse vibrations.

Got STi engine mounts, but I believe need to jack up engine!!! after removing the pitch bar and maybe the headers off the heads?

Any one know better please?

Ta

Neil