Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Need Help,Please engine cut out with decat,my01

Thread Tools
 
Search this Thread
 
Old 11 October 2002, 07:12 PM
  #1  
stephen emery
Scooby Regular
Thread Starter
 
stephen emery's Avatar
 
Join Date: Feb 1999
Posts: 3,982
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

HELP
realy struggling on this one

I driving along engine dies check light comes on, dies again after a few moments then runs okish.
checked and i get P1301 misfire and P1544 exhaust to hot.
codes clear and drives ok for a while , this time 10mile then same again??
my01 wrx ppp???
Old 11 October 2002, 08:40 PM
  #2  
stephen emery
Scooby Regular
Thread Starter
 
stephen emery's Avatar
 
Join Date: Feb 1999
Posts: 3,982
Likes: 0
Received 0 Likes on 0 Posts
Question

help
please
Old 11 October 2002, 09:24 PM
  #3  
Nathan L
Scooby Regular
 
Nathan L's Avatar
 
Join Date: Nov 2001
Posts: 5,502
Likes: 0
Received 0 Likes on 0 Posts
Smile

Stephen.

Don't know if this helps but I had a mis-fire on my 01 PPP + Full decat. It turned out to be the exhaust gas temperature sensor that had failed. The flames had toasted it.

50.00 fitted and no problems since.

Nathan..
Old 11 October 2002, 09:36 PM
  #4  
Dave T-S
Scooby Regular
 
Dave T-S's Avatar
 
Join Date: Aug 2000
Location: Newmarket Suffolk
Posts: 8,897
Likes: 0
Received 4 Likes on 1 Post
Exclamation

Steve

I've replied to your email. I also suggested a toasted EGT probe.
Old 11 October 2002, 11:29 PM
  #5  
stephen emery
Scooby Regular
Thread Starter
 
stephen emery's Avatar
 
Join Date: Feb 1999
Posts: 3,982
Likes: 0
Received 0 Likes on 0 Posts
Post

thanks chaps will try this !
and have a word with pete

steve
Old 12 October 2002, 01:15 AM
  #6  
boushka
Scooby Newbie
 
boushka's Avatar
 
Join Date: Nov 2001
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Post

did you take extra care when fitting the up pipe as the sensor is easily damaged

that would account for the problems you have
not saying you have damaged it ~ just thats its possible as its a difficult job to do ya self
or did you get a garage to fit it

get the EGT sensor changed and see how it goes

Brian S
Old 12 October 2002, 03:34 AM
  #7  
Caronte
Scooby Regular
 
Caronte's Avatar
 
Join Date: Oct 2001
Posts: 632
Likes: 0
Received 0 Likes on 0 Posts
Post

one trial you could do is to put some lower temperature sparks. this should help the petrol to be burnt much better thus avoiding misfires and detonations outside the combustion chamber.

Andrea
Old 12 October 2002, 01:14 PM
  #8  
stephen emery
Scooby Regular
Thread Starter
 
stephen emery's Avatar
 
Join Date: Feb 1999
Posts: 3,982
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

got some good advise from pete croney at scoobysport . off there on monday.
fingers crossed

steve
Old 12 October 2002, 04:19 PM
  #9  
gadget kev
Scooby Regular
 
gadget kev's Avatar
 
Join Date: Sep 2002
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
Post

hope you get it sorted mate
Old 10 November 2002, 09:26 PM
  #10  
Nathan L
Scooby Regular
 
Nathan L's Avatar
 
Join Date: Nov 2001
Posts: 5,502
Likes: 0
Received 0 Likes on 0 Posts
Post

Decat exhaust should AFAIK be cooler than the standard exhaust.

Don't quote me on that though.

I've just checked and the EGT fault code you have was the same as mine.

Nathan..

[Edited by Nathan L - 10/11/2002 9:27:01 PM]
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
02 July 2023 01:54 PM
kenc
Wanted
6
02 October 2015 09:12 PM
ALEXSTI
General Technical
5
28 September 2015 09:29 PM
speedrick
Subaru Parts
0
26 September 2015 02:58 PM
shorty87
Other Marques
0
25 September 2015 08:52 PM



Quick Reply: Need Help,Please engine cut out with decat,my01



All times are GMT +1. The time now is 07:12 PM.