Vinesh

1) Is this gauge suppose to make a buzzing sound when its operating, ie when boosting up?

2) When the engine is idling (Minus Readings), is the marker suppose to be steady or have a slight movement in it (Slight Shake)?

Knowlesy

it will have slight movement, v sensitive if you blip the throttle a fraction the rev counter won't move but your boost gauge will!!! I sit in traffic trying to get the boost gauge to wind up without making the revs higher!!!

Mine certainly doesn't buzz or hum or make any noises

Beastie

iTrader: (2)

It sounds like you dont have a restrictor in the line to the gauge. This controls the pressure ramp into the gauge and smooths out the readings. It shouldnt fluctuate and stutter as it wont last long!

Vinesh

Where abouts in the tubing would the restrictor go?

What does it look like?


[Edited by Vinesh - 5/30/2002 9:53:34 AM]

Vinesh

top

BugEyed

Vinesh

I'll answer but it based on the MY01 version. The restrictor is a small piece of brass tubing that connects into the line from the engine very close to the engine itself.

HTH

Duncan

Vinesh

Where would I buy the restictor from.

I went to GGR and they said the resitrictor is built into the gauge.

ricco

Mine came as part of the Tee piece. Dont know where you'd get one from though?