Scoobyclinic & Pat - Please Read ;)
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Scoobyclinic & Pat - Please Read ;)
Well big thanks to scoobyclinic and Pat today.
Turned up at around 10am on a sunday thanks to steven (p20spd) borrowing a trailer and towing me down.
Pat arrived 15mins later and fixed a customers car whilst we made use of the floor and fixed a blowing backbox and downpipe gasket (ok silicone sealer).
we then got my car onto the rolling road, whilst I had a quick in at the deep end lesson on how I was to operate the rolling road.. Did I mention I had to drive the car at the same time? Hard work for me on a sunday morning!
A bit of test runs revealed that the fuel pump mods meant that we could remove a **** load of fuel. once this was done we did a few runs..
after a bit of playing we managed 460bhp @ the wheens and 521.7 at the flywheel at 23psi boost. However this was the last run as the subframe decided to make a hole in my exhaust.
As I want to run at elvington next week, and mapping isnt finished, scoobyclinic have offered to fix the car for me. All I can say is 'NO ONE HAS EVER, WORKED ON MY CAR... They are! Says it all really
So anyway big thanks to scoobyclinic for use of your new RR, despite me threatening to break it on here
And sorry to upset you kev when you thought the 460 was at the flywheel
so if you at the clinic this week.. hands off my car!
few pics..
Only thing is, Im about to ring the clinic, and see if they will do a couple of other things whilst its there..
ARGH..
David
Turned up at around 10am on a sunday thanks to steven (p20spd) borrowing a trailer and towing me down.
Pat arrived 15mins later and fixed a customers car whilst we made use of the floor and fixed a blowing backbox and downpipe gasket (ok silicone sealer).
we then got my car onto the rolling road, whilst I had a quick in at the deep end lesson on how I was to operate the rolling road.. Did I mention I had to drive the car at the same time? Hard work for me on a sunday morning!
A bit of test runs revealed that the fuel pump mods meant that we could remove a **** load of fuel. once this was done we did a few runs..
after a bit of playing we managed 460bhp @ the wheens and 521.7 at the flywheel at 23psi boost. However this was the last run as the subframe decided to make a hole in my exhaust.
As I want to run at elvington next week, and mapping isnt finished, scoobyclinic have offered to fix the car for me. All I can say is 'NO ONE HAS EVER, WORKED ON MY CAR... They are! Says it all really
So anyway big thanks to scoobyclinic for use of your new RR, despite me threatening to break it on here
And sorry to upset you kev when you thought the 460 was at the flywheel
so if you at the clinic this week.. hands off my car!
few pics..
Only thing is, Im about to ring the clinic, and see if they will do a couple of other things whilst its there..
ARGH..
David
#7
Former Sponsor
Trust me to have a day off and miss all the fun!!
DOH!
And yes young mr wallis I have just played "spot the standard part"
there aint many!!!!
ads
DOH!
And yes young mr wallis I have just played "spot the standard part"
there aint many!!!!
ads
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
psml..
Power steering reservoir / pump.. nope later car, with different pressure valve for 94 pipe work..
Alternator (Not std bracket or location though)
Starter Motor is std!!! - **** nope.. took a grinder to it because of the 6spd.
Ads, I may be down during the week or next saturday.
David
Power steering reservoir / pump.. nope later car, with different pressure valve for 94 pipe work..
Alternator (Not std bracket or location though)
Starter Motor is std!!! - **** nope.. took a grinder to it because of the 6spd.
Ads, I may be down during the week or next saturday.
David
#10
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
hows that work, because I havent done 'all' the work?
Andy..
take car from leeds -> chesterfield.. break it chesterfield -> leeds -> chesterfield -> elvington..
NAH..
besides dropping subframe and welding whilst on ramps would be a lot easier than trying to weld whilst laying on the floor..
Weld 'splatter' in your ear isnt nice.. and I dont think I can tig weld whislt laying on my back.
David
Andy..
take car from leeds -> chesterfield.. break it chesterfield -> leeds -> chesterfield -> elvington..
NAH..
besides dropping subframe and welding whilst on ramps would be a lot easier than trying to weld whilst laying on the floor..
Weld 'splatter' in your ear isnt nice.. and I dont think I can tig weld whislt laying on my back.
David
#14
Former Sponsor
pmsl loved Davids coment today when talking on the phone and I quote,
"yeah and we only had the boost up to 23psi"
just a quick glance at the car you can tell 1000's of hours have been spent on this very trick bit of kit!
hats of to you David, love the bonnet&the fuel pumps,and the ic inlet proper DIY
Ads
"yeah and we only had the boost up to 23psi"
just a quick glance at the car you can tell 1000's of hours have been spent on this very trick bit of kit!
hats of to you David, love the bonnet&the fuel pumps,and the ic inlet proper DIY
Ads
Last edited by specialx; 14 March 2005 at 10:25 PM. Reason: because fump pumps do not resemble fuel pumps
#15
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Ads, i was talking to someone on the phone, whilst in the engine shop, and they were struggling to hear me while davids car was on full chat
Cracking place they got there. Dead simple, what you see is what you see, Kevs speaks English, no bullsh1t, just plain good old english.
It isnt marbled floored, or anything like that, just straight forward.
I am now thinking of taking mine down for all the paintwork sorting out.
Steven
Cracking place they got there. Dead simple, what you see is what you see, Kevs speaks English, no bullsh1t, just plain good old english.
It isnt marbled floored, or anything like that, just straight forward.
I am now thinking of taking mine down for all the paintwork sorting out.
Steven
#19
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
dyney, its MOT'd till may.. not taxed tho.. Sorn'd
dyney..clear front indicators dont make it go any faster, and the clear sides came off another car I bought.. (they are held in with pink grip though!!)
dyney..clear front indicators dont make it go any faster, and the clear sides came off another car I bought.. (they are held in with pink grip though!!)
#23
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
{shakes head}
sorry about file format..
http://www.wallis2000.co.uk/uploads/1.asf
http://www.wallis2000.co.uk/uploads/2.asf
http://www.wallis2000.co.uk/uploads/3.asf
http://www.wallis2000.co.uk/uploads/4.asf
sorry about file format..
http://www.wallis2000.co.uk/uploads/1.asf
http://www.wallis2000.co.uk/uploads/2.asf
http://www.wallis2000.co.uk/uploads/3.asf
http://www.wallis2000.co.uk/uploads/4.asf
#29
Former Sponsor
Originally Posted by P20SPD
Ads, i was talking to someone on the phone, whilst in the engine shop, and they were struggling to hear me while davids car was on full chat
Cracking place they got there. Dead simple, what you see is what you see, Kevs speaks English, no bullsh1t, just plain good old english.
It isnt marbled floored, or anything like that, just straight forward.
I am now thinking of taking mine down for all the paintwork sorting out.
Steven
Cracking place they got there. Dead simple, what you see is what you see, Kevs speaks English, no bullsh1t, just plain good old english.
It isnt marbled floored, or anything like that, just straight forward.
I am now thinking of taking mine down for all the paintwork sorting out.
Steven
I can't wait to see Davids car at full boost!
It must be so much fun watching your hard work and ££££'s paying off producing great graphs on the dyno!
Fingers crossed for the reliability factor David
Ads
Last edited by specialx; 17 March 2005 at 09:11 PM.