Cabeling PS2 into a router
#1
Scooby Regular
Thread Starter
Join Date: Apr 2001
Location: Whatever rocks your barge.
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Ok here is the problem:
PS2 is downstairs and PC and the router is upstairs
The ADSL socket is where the PS2 is and then cable going upstairs into the router
now where can I get long long long enough cable between the router and PS2 (or PC and router)?
The longest I've found is 3m and I will need something like 15m
thanks for any suggestions
PS2 is downstairs and PC and the router is upstairs
The ADSL socket is where the PS2 is and then cable going upstairs into the router
now where can I get long long long enough cable between the router and PS2 (or PC and router)?
The longest I've found is 3m and I will need something like 15m
thanks for any suggestions
#2
Moderator
iTrader: (5)
Join Date: Nov 2001
Location: Not all those who wander are lost
Posts: 17,863
Received 0 Likes
on
0 Posts
If you move the router downstairs to the where the ADSL socket and PS2 are, then you could just make one up with some Cat5 and a couple of RJ45's ? I've got some cable and crimp tools but no RJ45's left
#5
Scooby Regular
Thread Starter
Join Date: Apr 2001
Location: Whatever rocks your barge.
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
wireless hmm nice, hmm it's after xmas, hmm no money
so it's Cat5 cable and RJ45 ends, will have a look on ebay
thanks
DJ> how much is your cable for?
thanks
so it's Cat5 cable and RJ45 ends, will have a look on ebay
thanks
DJ> how much is your cable for?
thanks
Trending Topics
#9
Scooby Regular
Thread Starter
Join Date: Apr 2001
Location: Whatever rocks your barge.
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
could somebody please tell me which cable I should use?
Cat5 Network CROSSOVER Cable RJ45
or
Cat5 UTP Network Patch Cable RJ45
thank you very much
Cat5 Network CROSSOVER Cable RJ45
or
Cat5 UTP Network Patch Cable RJ45
thank you very much
#11
Scooby Regular
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
PS2 needs a crossover cable too if you're going straight into an ethernet modem or network card on a PC.If you're going into a routers built in hub then a standard RJ45 cable will suffice.....
Good luck
Nick
Good luck
Nick
Thread
Thread Starter
Forum
Replies
Last Post