Scoty

13:00:10 #12 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 342814 (76:12.64)

13:00:10 #13 Text 0 File DlgWaitCD.cpp, Line 204
Write in overburning mode: FALSE

13:00:10 #14 Text 0 File DlgWaitCD.cpp, Line 1403
Recorder: HP DVD Writer 100j;
CDRW code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data: ?

13:00:10 #15 Text 0 File ThreadedTransferInterface.cpp, Line 815
Prepare recorder HP DVD Writer 100j for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 702392320

13:00:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 843
Removed 2 run-out blocks from end of track 1.

13:00:10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342815 (342815) = #342815/76:10.65
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 342813 blocks [HP DVD Writer 100j ]
--------------------------------------------------------------

13:00:10 #18 Phase 24 File dlgbrnst.cpp, Line 1566
Caching of files started

13:00:10 #19 Phase 25 File dlgbrnst.cpp, Line 1566
Caching of files completed

13:00:24 #20 Phase 36 File dlgbrnst.cpp, Line 1566
Burn process started at 2x (300 KB/s)

13:00:24 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1947
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

13:00:24 #22 Text 0 File Mmc.cpp, Line 16666
Set BUFE: supported -> ON

13:00:24 #23 WINPFILE 32 File winpfile.cpp, Line 265
The process cannot access the file because it is being used by another process.

C:\Program Files\Direct Connect\Received Files\Waiting Burn\American Beauty.avi

13:00:24 #24 TRANSFER 2 File geniso.cpp, Line 4850
The process cannot access the file because it is being used by another process.

C:\Program Files\Direct Connect\Received Files\Waiting Burn\American Beauty.avi

13:00:24 #25 SCSI -1173 File Cdrdrv.cpp, Line 1412
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02280000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x90
Sense Qual: 0x82
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x90 0x82

13:00:24 #26 DVDR -1173 File Writer.cpp, Line 331
Read Write Control Task Error

13:00:25 #27 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

13:00:25 #28 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

13:00:25 #29 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state

13:00:25 #30 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack

13:00:25 #31 SCSI -1176 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04

13:00:25 #32 DVDR -1176 File WriterStatus.cpp, Line 227
Session fixation error

13:00:25 #33 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

13:00:25 #34 Text 0 File WriterStatus.cpp, Line 236
falling back to disc fixation

13:00:25 #35 SCSI -1176 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04

13:00:25 #36 DVDR -1176 File WriterStatus.cpp, Line 227
Session fixation error

13:00:25 #37 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

13:00:25 #38 Phase 38 File dlgbrnst.cpp, Line 1566
Burn process failed at 2x (300 KB/s)

13:00:25 #39 Text 0 File Scsicmd.cpp, Line 384
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[Edited by Scoty - 10/2/2002 2:40:24 PM]

DJ Dunk

iTrader: (5)

This looks like the problem to me. Do you still have the film open ? Restart your PC and try to burn again.

I assume this is a Divx file, they tend to get locked once opened. Opening another Divx file sometimes frees up the previous one.

Failing that, try burning DAO instead of TAO.

Let us know if not and I'll try to help more . . . .

[Edited by DJ Dunk - 10/2/2002 3:03:22 PM]

DJ Dunk

iTrader: (5)

One more thing . . .

I take it nobody is downloading it from you using Direct Connect ?
Close Direct Connect to be sure

[Edited spolling]

[Edited by DJ Dunk - 10/2/2002 3:52:36 PM]

Scoty

Have used nero for a while now, but this morning I cannot write discs with it. I put a blank cd-r in, and try to burn a data disc, the buffer builds up, then an error message comes up saying, could not perform fixation, burning failed.

Any ideas?

P.S. I have uninstalled and re-installed, buut no joy.

DJ Dunk

iTrader: (5)

I assume you are not trying to overburn ?

Have you got the rest of the log ?

Scoty

No overburn,but not sure about the log's? Could you explain a bit more please mate?

DJ Dunk

iTrader: (5)

Not got it in front of me at the mo, but when you start to burn in Nero theres a log on screen of everything its doing. Can do a copy & paste of this ? Could help diagnose the problem better

DJ Dunk

iTrader: (5)

BTW, have you tried lowering the burn speed to see if this makes a difference ?

Scoty

Yes tried all allowed burn speeds, can you tell me how to copy and paste it? I have seen this done before!

chiark

Have u changed driver for your IDE channels?

DJ Dunk

iTrader: (5)

You should get a screen like this:



But without the success bit Click the Save button when its failed, save the file. Open it, copy the text and paste it into a new post.

Scoty

No drivers changed, although I have just tried writing with HP record now and it does the same. Burning VCD with VCDEasy is fine.

i have saved the log as a text file is that what you need to read?

DJ Dunk

iTrader: (5)

Thats it, just copy and paste the text on here

Scoty

Scott Lawson

1507-0851-4056-0627-5388-3779

Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 26/06/2002 15:06:32
Nero Version: 5.5.9.6
Recorder: <HP DVD Writer 100j> Version: 1.34 - HA 1 TA 1 - 5.5.9.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-116>Version: 1.21 - HA 1 TA 0 - 5.5.9.6
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 100j atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 256MB (262652kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

2.10.2002
CD-ROM (ISO)
12:59:56 #1 SCSI -1033 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x04 0x01

12:59:58 #2 SCSI -1033 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x04 0x01

13:00:00 #3 SCSI -1033 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x04 0x01

13:00:02 #4 SCSI -1033 File Cdrdrv.cpp, Line 1208
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x04 0x01

13:00:10 #5 Text 0 File Isodoc.cpp, Line 6003
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:00:10 #6 Phase 90 File dlgbrnst.cpp, Line 1566
Buffer Underrun Protection activated

13:00:10 #7 Text 0 File Reader.cpp, Line 118
Reader running

13:00:10 #8 Text 0 File Writer.cpp, Line 130
Writer HP DVD Writer 100j running

13:00:10 #9 ISO9660GEN -11 File geniso.cpp, Line 4430
First writeable address = 0 (0x00000000)

13:00:10 #10 Text 0 File Burncd.cpp, Line 3553
Turn on Track-At-Once, using CD-R/RW media

13:00:10 #11 Text 0 File ThreadedTransferInterface.cpp, Line 663
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 342815 (342815) = #342815/76:10.65
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

Scoty

Re-booted, no change. Tried different Divx and no change.
How do I burn in DAO instead of TAO?

DJ Dunk

iTrader: (5)

Here (Check the box):



Running out of ideas now

Can you write any other files to disc (Not this divx file) ? Have you tried another CD ?

Dream Weaver

How to incriminate yourself in one easy move

DW

Scrappy2

Could have been worse!

DJ Dunk

iTrader: (5)

Could have been . . . .

C:\Program Files\Direct Connect\Received Files\Waiting Burn\XXX Lesbo Love Sessions Vol 4.avi

Scoty

It's fake share honest, ocifer!

Seems to be going OK now.
Checked DC for downloads. There is a queue for a few avi's, one of them could be the file I am trying to burn. Closed DC and Nero is burning them now!

Scoty

THANKS

DJ Dunk

iTrader: (5)

No Probs