Would 1.2 bar be safe on a UK MY97?

[Edited by DreXeL - 11/6/2002 1:53:43 PM]

 

how much should i adjust it so it's safish but yet fast!

 

What year?

Run it around 1.2 bar if it's a later model. I run one on a MY95 and it's set to 1 bar at WOT in fifth. Fuel cut is set at around 1.05 on pre 96 but quite a bit higher on later models.

 

What is ... WOT???

 

it is a MY95. thanks for the replies guys.

 

WOT means wide open throtle

 

You could always build a lifter for a pre MY97 (search for DIY FCD thread - cost <£15) & safely run 15 PSI - Fuel cut is currently approx 1.05 bar on UK MY95s.

Or you could always upgrade your ECU for not much
more http://shop.scoobynet.co.uk/Product.asp?ProductID=499 and enjoy better fuelling, ignition & boost mapping without the fuel-cut or need for a Dawes or FCD.

Cheers,

Chris

 

Had my 94 wagon running 1.3 bar at WOT but had to fit Dawes fule cut out raiser to get there.
Had it running at this for about 3 months now with no prob's.

 

Dont know what the fuel cut is on yours m8 but 1.2 bar = 17 psi (or thereabouts) , fuel-cut on a MY01+ WRX is 17.5psi - Watch it in 5th gear and on cold days ......... Best to run it at 1.1 bar m8

[Edited by Ru$$Rip - 11/12/2002 7:13:26 PM]