SBR 2.35 Bugeye Wagon JDM WRX AVCS Project
12 August 2011, 07:02 PM
#94
Some updates:
Today we are receive bumpers from bodyshop,everything is now ready for bolt on(or hope so),just small things us holding and this is bigger injectors,which we hopping buy in coming days
Here is pics of new rear bumper with new addon lip,
Jura
Today we are receive bumpers from bodyshop,everything is now ready for bolt on(or hope so),just small things us holding and this is bigger injectors,which we hopping buy in coming days
Here is pics of new rear bumper with new addon lip,
Jura
13 August 2011, 05:12 PM
#99
Scooby Regular
iTrader: (41)
Join Date: Nov 2003
Location: in the woods...........555 Wagon Sqn
Posts: 13,347
Received 55 Likes
on
42 Posts
Originally Posted by jura11
Thanks Ian,just now we are thinking create full flat floor with new added(or will be added) Diffuser(Voltex or Varis one
)
)
Last edited by trails; 13 August 2011 at 05:14 PM.
13 October 2011, 04:30 PM
#100
Little bit updates
Few weeks ago we are bought alloys(Rota Grid) from Tom(here know as Chaos1980)from SurreyScoobies for good price,plus yesterday we are bought Syvecs S6 PNP
Finally car is de-stickered(few pics are older with stickers)
Few problems occurred in our build and hope so this week car will be running as Neil promised.
Here are pics,which will tell more than words
Syvecs S6 Pnp
Jura
Few weeks ago we are bought alloys(Rota Grid) from Tom(here know as Chaos1980)from SurreyScoobies for good price,plus yesterday we are bought Syvecs S6 PNP
Finally car is de-stickered(few pics are older with stickers)
Few problems occurred in our build and hope so this week car will be running as Neil promised.
Here are pics,which will tell more than words
Syvecs S6 Pnp
Jura
keep pics coming 
22 October 2011, 05:27 PM
#106
Few updates
Car is already prepared for firing up,electrics is wired which is good,but last thing is holding us is again 4EAT wiring on ECU etc.,which is little bit complicated on first look,but Neil said should be OK,bloody automatics
Here are few pics from today,please these pics are taken with phone,not best quality
Jura
Car is already prepared for firing up,electrics is wired which is good,but last thing is holding us is again 4EAT wiring on ECU etc.,which is little bit complicated on first look,but Neil said should be OK,bloody automatics
Here are few pics from today,please these pics are taken with phone,not best quality
Jura
22 October 2011, 05:51 PM
#108
Thanks,you are right Ryan,but wiring all bits now this holding,which i know its not straight forward on new age conversion to manual from automatic..
Hope so and fingers crossing this week should be running and be on road too.
Jura
Hope so and fingers crossing this week should be running and be on road too.
Jura
22 October 2011, 06:39 PM
#112
Thanks Frayz
Jura
Thanks Ian,hope so will be fired up next week if everything is sorted with wiring..
Swirl pot should be here in coming week(is it 4 inlet/outlet) and hope so will be plumbed too next week or after run in etc. and ready for few track days.
Jura
Thanks matey,we are went for JDM V8 STi speedo cluster due our old one has been for automatic and these we are bought for great price,probably nicest upgrade in interior.
Jura
Jura
Swirl pot should be here in coming week(is it 4 inlet/outlet) and hope so will be plumbed too next week or after run in etc. and ready for few track days.
Jura
Thanks matey,we are went for JDM V8 STi speedo cluster due our old one has been for automatic and these we are bought for great price,probably nicest upgrade in interior.
Jura
02 December 2011, 03:49 PM
#114
Few updates:
Car finally is taking shape,just few bits before car will go on road(run-in map,adjustment suspension,wheel alignment and most importantly MOT and tax),next week hope so car will be on road for run-in and for painful 600-1000miles on OE ECU and later on we are switching to Syvecs for full remap.
Here is few pics,which send Neil@Slowboy racing
And few upgrades before car will be on road
Whiteline Anti-Lift Kit
We've few ideas to do:
Create rotated setup from our MD321T Billet,we will need custom up-pipe and downpipe
Second thing is Spec C roof vent,which we are hopping to fit as well in near future
Jura
Car finally is taking shape,just few bits before car will go on road(run-in map,adjustment suspension,wheel alignment and most importantly MOT and tax),next week hope so car will be on road for run-in and for painful 600-1000miles on OE ECU and later on we are switching to Syvecs for full remap.
Here is few pics,which send Neil@Slowboy racing
And few upgrades before car will be on road
Whiteline Anti-Lift Kit
We've few ideas to do:
Create rotated setup from our MD321T Billet,we will need custom up-pipe and downpipe
Second thing is Spec C roof vent,which we are hopping to fit as well in near future
Jura
