Notices
Member's Gallery Pictures of your pride and joy

Project track car something for the weekend !

Old 22 October 2011 | 08:30 PM
  #451  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Old 22 October 2011 | 11:14 PM
  #452  
GezP's Avatar
GezP
Scooby Regular
iTrader: (23)
 
Joined: Jan 2010
Posts: 1,642
Likes: 0
From: Bedfordshire
Default

I knew you'd love it at DT. Jealous of the seat mate, it's the one i want and for me bar far the most comfy.

The project is looking the nuts mate. What helmet did you get in the end?
Old 22 October 2011 | 11:28 PM
  #453  
scoobynelly's Avatar
scoobynelly
Scooby Regular
iTrader: (21)
 
Joined: Jan 2010
Posts: 1,111
Likes: 0
Default

Ello lee,

i have just spent over 2 hours reading this thread, and i must say im massively impressed. The work involved, all the time and effort you have put in is incredible. im building a project myself, but nothing like this lol. A great project, great read and can't wait to see her finished! top marks to you buddy, and you have to give a thumbs up to dave for his paint experties!
Old 22 October 2011 | 11:31 PM
  #454  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

I tried loads on Gez, but the one i liked was 2k ,i never got one today spent to much as it is got the gloves i wanted nice snug fit and thin /light weight.

The shoes (flat soles) was my concern but never had my size in so iv'e ordered 10's for postage when they get them in !

Im still looking at helmets but have an idea when the time is right but the trip there got me some good ideas even going to invest in a suit aswell nothing to expensive but the cheapest they do is £270.

The seats are fantastic it looked like musical chairs when i was there think i must have tried them all atleast once ,i asked him to get a brand new pro series XL out for me once i tried it new it was the one and a reasonable price copared to some especially the race tech ones at 2k each.
The pro series is very light considering its GRP with kevlar composite just the side rails are expensive which puts the costs up but a great day me and my lad had.

Hope you get yours soon would def recommend thanks for the heads up mate appreciate it .
just need the car back from rewire then on the final stages ready for remap !!!
Old 22 October 2011 | 11:41 PM
  #455  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Originally Posted by scoobynelly
Ello lee,

i have just spent over 2 hours reading this thread, and i must say im massively impressed. The work involved, all the time and effort you have put in is incredible. im building a project myself, but nothing like this lol. A great project, great read and can't wait to see her finished! top marks to you buddy, and you have to give a thumbs up to dave for his paint experties!
Thanks to be honest its been a good year been traumatic and dishartening at times and have nearly thrown the towel in a few times.

To some it seems over the top but its what iv'e wanted to do for ages ,i have messed about with cars for years and even built my own cooper (1963) with a cage /oil cooler /guages seats but i was only 19/20 then this is a different league.
I know this engine isnt going to last long but what i have done is built the foundations for a great competion car that can and will get better, its kept me away from the pub and given me something to focus on aay from work.

Thanks for your comments and not long to go now looking forward to hearing it run again its been 10mths since i started it as you know thanks for reading it and il pass o the message to my mate dave top sprayer can make a rusty nail look good !!
Old 23 October 2011 | 01:11 AM
  #456  
GezP's Avatar
GezP
Scooby Regular
iTrader: (23)
 
Joined: Jan 2010
Posts: 1,642
Likes: 0
From: Bedfordshire
Default

good stuff mate. 2k for the helmet i wouldn't of even picked it up, too tempting.

Must admit, i do like looking at the suits in the catalouge. Might look a bit over the top for me but I bet they are comfy for driving all day.

I too was up and down like a yoyo on the seats, they must get used to see people looking silly doing that but it really does help having them all out.

Not too much longer until your done mate, can't wait to see the finished motor and hopefully meet up one day on a track day
Old 23 October 2011 | 01:13 AM
  #457  
GezP's Avatar
GezP
Scooby Regular
iTrader: (23)
 
Joined: Jan 2010
Posts: 1,642
Likes: 0
From: Bedfordshire
Default

Also mate, it's not over the top at all.
Old 24 October 2011 | 07:05 PM
  #458  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

I have been intouch with grimsby auto electrics and my car is ready to pick up on sat morning,so i can now get on with fitting the fuel system and new seat and a few other bits ready for the car to be set up .

New clutch and flywheel is getting fitted next week as my last one started to slip when it was live mapped late last year.
Old 26 October 2011 | 06:01 PM
  #459  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Remap booked with Duncan at GR Performance in Rotherham on there new dastek rollers getting closer 6 weeks to get things finished
Old 29 October 2011 | 10:06 PM
  #460  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Had some bad news today car has been in with the auto electrician 4 weeks and was told he hasnt started it yet ,i picked the car up on the back of the trailor and brought it back as i had loads to do on it so here's my day.

First job was to start rolling the arches ready for fitting the new wheels and tyres, as i had started on installing the fuel system my mate dave turned up and was intrigued on how it was done so seemed the ideal candidate for the job ,he made it look easy a little at a time and has the patience of a saint cheers mate same time tommorow !

I started on installing the fuel hose by fitting the AN fittings on the teflon hose this was proving to be very difficult as they are tight as hell, so boiling the kettle several times and dipping the whole hose into the red hot water this just helped to slide the fittings inside the ptfe inner.

Cutting of the braided hose was done with a small air gun with a cutting disc after taping up the end to stop the end from fraying .

I must say the rolled arches are spot on ,i have raised the front suspension for now untill the geomtry has been set up but on full lock there is no rubbing and plenty of clearance.










I trial fitted the seat and fits fine

Old 29 October 2011 | 10:14 PM
  #461  
JonMc's Avatar
JonMc
Scooby Senior
iTrader: (51)
 
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Default

Arches look good, is that your own roller
Old 29 October 2011 | 10:25 PM
  #462  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

yes mate why do you ask ?
Old 29 October 2011 | 10:38 PM
  #463  
JonMc's Avatar
JonMc
Scooby Senior
iTrader: (51)
 
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Default

I did my rear arches before the respray with a hammer and dolly set, but never got around to doing the fronts - depending upon future wheel and suspension choices I may need to consider rolling them
Old 29 October 2011 | 11:09 PM
  #464  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

where are you from Jon ? you could borrow them or bring your car down the garage im sure you could lend it .
Old 29 October 2011 | 11:13 PM
  #465  
JonMc's Avatar
JonMc
Scooby Senior
iTrader: (51)
 
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Default

Just outside Watford mate.
Old 29 October 2011 | 11:42 PM
  #466  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

bit of a trek as im in lincolnshire !
Old 29 October 2011 | 11:44 PM
  #467  
JonMc's Avatar
JonMc
Scooby Senior
iTrader: (51)
 
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Default

I'm in Lincoln about once every 2 months, doing my MSc at Lincoln Business School. Whereabouts in Lincolnshire are you?
Old 29 October 2011 | 11:50 PM
  #468  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

cleethorpes
Old 30 October 2011 | 12:53 AM
  #469  
GezP's Avatar
GezP
Scooby Regular
iTrader: (23)
 
Joined: Jan 2010
Posts: 1,642
Likes: 0
From: Bedfordshire
Default

Looking good Lee. You'll love the brakes mate, I did my first track day a few days back and they worked really well and I only had the K-Sport pads on.

Still jealous of the seat mate, mine are cutting into my thighs and not giving enough support, gotta get them asap.

Keep up the good work mate
Old 30 October 2011 | 08:01 AM
  #470  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Cheers Gez had to remove front calliper to allow access for sweeping action of roller .

I have the blue stuff pads in so il see how they perform need to get the car out when finished and get some milage in the clutch and brakes,il have to drive it up and down the farm road (private) a few times to get them bedded in .

The seat fits on the CC rails a treat was going to put it in but wiring needs doing as he has let me down !
Old 30 October 2011 | 06:41 PM
  #471  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Finished off as far as i could go with the fuel lines as i have ran out of An-6 hose so ordered 4m more to complete the setup.

My mate Dave finished rolling the other 2 arches while i fitted the front footwell kick plate .

Re-fitted the wiper arms and renewen a boost pipe from bottom of solenoid upto manifold as i have done away with the co2 emmissions canister that was mounted at the front drivers corner.

The suspension was wound up untill the geomtry is set up ready for its first outing at blyton for testing on the 10th dec (fingers crossed ) need to push on with the wiring starting next week.













Old 30 October 2011 | 06:59 PM
  #472  
JonMc's Avatar
JonMc
Scooby Senior
iTrader: (51)
 
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Default

This car is really looking the business - can't wait for it to be finished
Old 30 October 2011 | 07:02 PM
  #473  
GezP's Avatar
GezP
Scooby Regular
iTrader: (23)
 
Joined: Jan 2010
Posts: 1,642
Likes: 0
From: Bedfordshire
Default

well done mate, looking good
Old 30 October 2011 | 07:22 PM
  #474  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Thanks chaps ! I suppose i had a vision last year of what i wanted it to look like but its growing on me the more i do to it.
Old 31 October 2011 | 10:57 PM
  #475  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default

Wiring getting started on thursday lets hope this time its done right .
Old 01 November 2011 | 01:58 AM
  #476  
frayz's Avatar
frayz
Essex Area Moderator
Essex Subaru Owners Club Badge
iTrader: (7)
 
Joined: Sep 2005
Posts: 19,945
Likes: 2
From: "Engineering Perfection in Essex"
Default

Love this build, car looks great
Old 03 November 2011 | 12:07 PM
  #477  
acko's Avatar
acko
Scooby Regular
 
Joined: Mar 2005
Posts: 3,349
Likes: 0
From: grimsby
Default

Originally Posted by leecalcars
Wiring getting started on thursday lets hope this time its done right .

will be mate, mike knows his stuff


roll on dec 10th
Old 03 November 2011 | 12:12 PM
  #478  
acko's Avatar
acko
Scooby Regular
 
Joined: Mar 2005
Posts: 3,349
Likes: 0
From: grimsby
Default

Originally Posted by frayz
Love this build, car looks great

lees put alot of time and money into this car, but must say when i saw it on sunday i thought to my self, what a BEAST this car will be when finished.

Just cant wait to see him taking it for the first run out but not too much longer to wait
Old 04 November 2011 | 11:26 PM
  #479  
leecalcars's Avatar
leecalcars
Thread Starter
Scooby Regular
iTrader: (37)
 
Joined: Jan 2005
Posts: 7,843
Likes: 0
From: never far away from my impreza
Default







Old 05 November 2011 | 04:29 PM
  #480  
jura11's Avatar
jura11
Scooby Regular
iTrader: (7)
 
Joined: Apr 2010
Posts: 10,523
Likes: 1
From: www.slowboy-racing.co.uk
Default

Love it Lee,this swirl pot looking like great job and arch rolling too,just if you are near to London matey


Jura

Thread Tools
Search this Thread
Quick Reply: Project track car something for the weekend !



All times are GMT +1. The time now is 12:20 AM.