Cheers Kev

 

Well as discussed yesterday when i bought that clutch, as soon as its up and running ill be knocking on your door for pat to throw some magic at it on your rollers, so youll find out straight away!

 

What clutch did you buy as I'm after one ? ;-)?

 

xtreme from scoobyclinic. Nowt else seems capable of dealing with an SC46 without going twin plate and adding a grand to the bill!

No personal experience yet as cars still going back together!

 

Sounds pretty unlikely regarding the bad batch/not V power, but then again, who knows.. Certainly doesn't hurt to try as suggested, or maybe by adding octane booster.

 

Hi,

I have had one fitted to my car for almost 3 years now and its fine, easy to operate and holds on to 576 BHP no problem.

seen performing at the scoobyshootout 2 years on the trot.

cheers
Kev

 

Just checked with my tuner, and he said I'm running 18-20 degrees advance in that problem area.
That doesn't tell me anything, and of course it differs between cars, but just to give you an idea..

 

That's a 5 speed int it need 6 speed

 

Hi,

I run a six speed clutch and flywheel with a 5 speed box, its a trick of the trade.

cheers
Kev

 

Tell me more kev
Pm Plz

 

How do you run a 6 speed clutch and flywheel on a 5 speed box kev,dont you have to hack the splines off the housing or something along those lines...please tell.

@Kev...Also do you have the extreme 5 speed clutches in stock as i need a clutch and flywheel before mapping day on the 16th at your place.

 

Hi,

5 speeders also in stock.

To get the bigger driven plate 6 speed clutch and flywheel to fit a 5 speed box you have to "dremmel" out a fair bit of bell housing, works a treat, no spline hacking needed.

cheers
Kev

 

Any comments in this, anyone?

 

Hi,

bear with us, I haven't forgot you, just waiting for my mapper to turn up, (kebeb waiting) I will then get his expert views.

Cheers
Kev

 

Let Pat eat his kebeb first though before you ask him...

 

Pm me details on 6 speed kit please gaffer

 

Hi,

no need for a PM its very simple, they are in stock at £379.99 + vat, made by extreme in Australia and have a clamping pressure of 1250 kg.

We do them fitted for £699.00 + vat.

cheers
Kev

 

Sweet
Looked on site only saw 5 speed
Is that complete with fly wheel?
If not what would you recommend plz

 

Kev I need an Sc46 within next week, will this clutch complement that on a 03 sti?

 

Without me having to go over the whole thread can anyone tell me how much the SC42 is inc VAT.

Cheers

 

oh the sc42 this is the one im waiting for just need to get some results on a built 2.o ps would an ap racing not take this power as i have heard people running 450hp with these clutch for a couple of years
but then they probally only use them as a fast road car like myself as i have just had an ap fitted ready for some sc42 action

 

same price as 46 I believe

 

SC42 Billet = £1250 + VAT
SC46 Billet = £1295 + VAT

Hope this helps

 

Hi,

kebab digested, not true actually it was a chicken in black bean sauce today,
here is Pats take on it.................

Timing looks about right, it could just be the mismatch of parts used or just one of those cars, to sort it you will have to port the exhaust housing, don't go mad just add a radius to the the waste-gate throat, not the button, take off any sharp edges with a dremmel, don't make it any bigger just smooth it out a bit.

Pat also says its far more likely on a 2.5 than it is on a 2.0 ltr engine, which is true now I think about it as we have had to port at least 50% of the 2.5 standard turbo charger cars when we have them in for mapping.

It does sometimes happen that a certain set of mods don't work together and cause issues like yours, still worth a try with some E 85 and a map tweak though.

cheers
Kev

 

Hi Mick,

where did the flywheel bit come from,

Wishful thinking me thinks, flywheels are in stock, £295.00 gets you a Chrome moly 6.3 kg Billet one.

We also do a 5 speed kit that comes with a Chrome Moly billet flywheel, a 240 mm organic disc and an uprated cover with 1350kg clamping at £639.95.

All prices + vat.

cheers
Lev

 

Hi,

absolutely, that's why we keep them in stock they are the perfect partner.

cheers
Kev

 

do i need a flywheel with this? and does this clutch rattle at slow speed?

 

Hi,

they don't rattle at all and drive as normal, flywheel is not compulsary, you only need one if your original is worn or you wish to add a lightweight one whilst the box is out.

cheers
Kev

 

Thanks kev yer a star, will be in touch in the next week

 

Oooh, chicken in black bean sauce. Is there no limits to this mans taste!!!!