scoobyclinics turbo's just got billet I mean better!
#1261
Scooby Regular
Thanks Kev
Just to clarify, the red trace is the car as we saw it bone stock.
Blue trace is with the following mods.
RCM headers, 3 inch decat system, 800cc injectors, Perrin front mount and induction kit, SC46 Billet turbo and forged rods and pistons. Ecu is the stock item with an Ecutek remap and it is running on straight Vpower.
Just to clarify, the red trace is the car as we saw it bone stock.
Blue trace is with the following mods.
RCM headers, 3 inch decat system, 800cc injectors, Perrin front mount and induction kit, SC46 Billet turbo and forged rods and pistons. Ecu is the stock item with an Ecutek remap and it is running on straight Vpower.
#1262
Scooby Regular
Apologies to Kev, but .......
I am slightly confused at what I have read about the OE ECU, unless I have read it in an different context of what confuses me. Confused?? I am.
An appropriate JDM ECU with MEGAROM does read over 300g/s and I can see over 1.55bar within DeltaDash (using the MEGAROM "Internal Boost Reading" parameter). However I agree without MEGAROM this is not possible on the OE ECU.
As I personally understand it.
I am slightly confused at what I have read about the OE ECU, unless I have read it in an different context of what confuses me. Confused?? I am.
An appropriate JDM ECU with MEGAROM does read over 300g/s and I can see over 1.55bar within DeltaDash (using the MEGAROM "Internal Boost Reading" parameter). However I agree without MEGAROM this is not possible on the OE ECU.
As I personally understand it.
#1263
Scooby Regular
#1264
Former Sponsor
iTrader: (3)
Apologies to Kev, but .......
I am slightly confused at what I have read about the OE ECU, unless I have read it in an different context of what confuses me. Confused?? I am.
An appropriate JDM ECU with MEGAROM does read over 300g/s and I can see over 1.55bar within DeltaDash (using the MEGAROM "Internal Boost Reading" parameter). However I agree without MEGAROM this is not possible on the OE ECU.
As I personally understand it.
I am slightly confused at what I have read about the OE ECU, unless I have read it in an different context of what confuses me. Confused?? I am.
An appropriate JDM ECU with MEGAROM does read over 300g/s and I can see over 1.55bar within DeltaDash (using the MEGAROM "Internal Boost Reading" parameter). However I agree without MEGAROM this is not possible on the OE ECU.
As I personally understand it.
#1265
Just had the 2.5 avcs with sc46 billet mapped. Pull is incedible.
Kev will put graphs up on here, but we now know we need uprated headers and a 3prt map sensor
Big thanks to Scooby clinic
Kev will put graphs up on here, but we now know we need uprated headers and a 3prt map sensor
Big thanks to Scooby clinic
#1267
Scooby Regular
You are very welcome m8. It has been a pleasure to tune that one thanks in part to your "Only the best for my car" attitude
Still trying to find the best value for money stand alone ecu for you, so we will talk again soon !
Still trying to find the best value for money stand alone ecu for you, so we will talk again soon !
#1269
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
as mentioned earlier by Tempo P1 here is his graph.
SC46 billet, 2.5 with avics in a P1 running syvecs, plenty more to come as Craigs budget allows, headers and up pipe will see the 450 BHP mark easily, just look at the spool on the standard headers, its instant on the road, stunning car.
cheers
Kev
as mentioned earlier by Tempo P1 here is his graph.
SC46 billet, 2.5 with avics in a P1 running syvecs, plenty more to come as Craigs budget allows, headers and up pipe will see the 450 BHP mark easily, just look at the spool on the standard headers, its instant on the road, stunning car.
cheers
Kev
#1270
Cheers Kev. Yers its going to be early in new year for the headers i think. I still cant believe the torque it has from low down. Pat was saying he can fettle and get it even lower!!
http://www.youtube.com/watch?v=q1xrHrtme-8
http://www.youtube.com/watch?v=Py6ifRNOlCY
http://www.youtube.com/watch?v=q1xrHrtme-8
http://www.youtube.com/watch?v=Py6ifRNOlCY
Last edited by tempop1; 15 November 2010 at 10:56 PM.
#1271
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
bit more Billet race footage this time from Donnington this Sunday.
http://www.youtube.com/watch?v=Kp87eD9urMk
So thats the impact test for the Billets taken care of.
As if the first bang is not enough check out the Rover that hits us later, good job its season end.
cheers
Kev
bit more Billet race footage this time from Donnington this Sunday.
http://www.youtube.com/watch?v=Kp87eD9urMk
So thats the impact test for the Billets taken care of.
As if the first bang is not enough check out the Rover that hits us later, good job its season end.
cheers
Kev
#1273
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
you are thinking of the Slag brothers who drove the Bouldermobile, at least I think thats correct.
Cheers
Kev
#1275
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
#1278
Scooby Regular
#1279
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
#1280
We used to choose a favourite & have Wacky Races bets at School.
I remember:-
The Slag Brothers (Me)
The Creepy Coop
The Ant Hill Mob
The Arkansas Chugabug
The Gruesome Twosome
Rufus Roughcut
Although Peter Perfect or Penelope Pitstop usually won, they were too naff to support!
At last I've found something on here I'm an expert on
I remember:-
The Slag Brothers (Me)
The Creepy Coop
The Ant Hill Mob
The Arkansas Chugabug
The Gruesome Twosome
Rufus Roughcut
Although Peter Perfect or Penelope Pitstop usually won, they were too naff to support!
At last I've found something on here I'm an expert on
#1281
Scooby Regular
iTrader: (25)
Hi,
bit more Billet race footage this time from Donnington this Sunday.
http://www.youtube.com/watch?v=Kp87eD9urMk
So thats the impact test for the Billets taken care of.
cheers
Kev
bit more Billet race footage this time from Donnington this Sunday.
http://www.youtube.com/watch?v=Kp87eD9urMk
So thats the impact test for the Billets taken care of.
cheers
Kev
#1282
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
#1283
Scooby Regular
On behalf of our very good friends at Scoobyclinic , we are carrying out some more testing of the already proven 35R Billet.
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
#1284
Former Sponsor
Join Date: Jul 2003
Location: www.scoobyclinic.com
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
On behalf of our very good friends at Scoobyclinic , we are carrying out some more testing of the already proven 35R Billet.
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
I am not going to sleep tonight ........
Cheers
Kev
#1289
Scooby Regular
iTrader: (55)
On behalf of our very good friends at Scoobyclinic , we are carrying out some more testing of the already proven 35R Billet.
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
You using the billet with a 0.63 or going up to .82 ?
#1290
Scooby Regular
Join Date: Nov 2006
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
On behalf of our very good friends at Scoobyclinic , we are carrying out some more testing of the already proven 35R Billet.
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn
We have one of our customers cars currently running one of our 2.1 strokers with a stock 35R with a .63 exhaust housing.
The car has always produced excellent numbers, but as is the norm the owner now wants that little bit more.
Running it on the dyno today it made 539bhp and 510lbft @ 2 bar boost on Vpower.
Spool on the dyno is as follows, 1 bar @ 4100rpm, 1.5 bar @ 4300rpm and 2 bar @ 4540rpm.
The current turbo is being removed as I am typing this and time permitting we will update with the new figures tomorrow.
Martyn