08/09 Hatches, Stand up and show yourselves!!!
#181
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
As Iain explained it (IIRC) at 380+BHP (however achieved) the movement of cylinders on the open deck blocks causes cylinder failure. Not due to ring problems or det.
He was looking into re-enforcing the cylinder/block stiffeners for his new type 25/27 engines, but I think is now using closed deck blocks.
Mine is warrantied by Iain so I'll leave it at his 355 stage and see how the new type 25 engine progresses.
He was looking into re-enforcing the cylinder/block stiffeners for his new type 25/27 engines, but I think is now using closed deck blocks.
Mine is warrantied by Iain so I'll leave it at his 355 stage and see how the new type 25 engine progresses.
#183
Also, when I had mine mapped with the Forge CAI I could have got 360+ bhp but settled back at about 350bhp. Having also had one replacement engine already (the infamous det issue), I would rather drive a 350bhp engine hard than have that little nagging worry in the back of my mind when flooring it with 370-380bhp on the standard open block/standard pistons set-up. Just a personal thing
p.s. I think we need our own little MY08/09 STI area on this forum like the IWSTI site!
Last edited by Dave_P; 04 June 2009 at 11:29 PM.
#184
Scooby Regular
Join Date: May 2009
Location: Oxfordshire, Xbox GT: Hawker Fury, Car: 330s Hatch
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
#185
Scooby Regular
Thread Starter
#186
Scooby Regular
iTrader: (1)
Join Date: Feb 2000
Location: Death Star
Posts: 21,835
Likes: 0
Received 0 Likes
on
0 Posts
Mog, can you help with some advice please mate...how hard/soft are the AST's, was looking at these (Curtis knows his stuff) but I do not want rock hard coilovers, I use my car everyday (done 17K miles in a year). Be honest please mate, what's the ride quality like?
Also, when I had mine mapped with the Forge CAI I could have got 360+ bhp but settled back at about 350bhp. Having also had one replacement engine already (the infamous det issue), I would rather drive a 350bhp engine hard than have that little nagging worry in the back of my mind when flooring it with 370-380bhp on the standard open block/standard pistons set-up. Just a personal thing
p.s. I think we need our own little MY08/09 STI area on this forum like the IWSTI site!
Also, when I had mine mapped with the Forge CAI I could have got 360+ bhp but settled back at about 350bhp. Having also had one replacement engine already (the infamous det issue), I would rather drive a 350bhp engine hard than have that little nagging worry in the back of my mind when flooring it with 370-380bhp on the standard open block/standard pistons set-up. Just a personal thing
p.s. I think we need our own little MY08/09 STI area on this forum like the IWSTI site!
There's more info here Litchfield about halfway down.
Take your cheque book just in case
#187
Scooby Regular
Join Date: May 2001
Location: Suffolk, very near Adnams !!
Posts: 2,860
Likes: 0
Received 0 Likes
on
0 Posts
More than happy with the AST set up (its my 3rd car with them on) and his steering mod. If I were you i'd speak to Litcho and get a test drive of his car with the AST and roll bars on and decide for yourself.
There's more info here Litchfield about halfway down.
Take your cheque book just in case
There's more info here Litchfield about halfway down.
Take your cheque book just in case
#188
Scooby Regular
iTrader: (5)
Drove Iains sti when he first got it and fitted the ast's was very impressed with the whole suspension setup.
In the end i opted for Bc racing coilovers for mine with 6/8kg spring rates, adjustable pillowball top mounts & adjustable 30 stage dampening to.
heres a couple pics
Old and new struts
Sits quite well now i must admit, handles like its on rails.
In the end i opted for Bc racing coilovers for mine with 6/8kg spring rates, adjustable pillowball top mounts & adjustable 30 stage dampening to.
heres a couple pics
Old and new struts
Sits quite well now i must admit, handles like its on rails.
#191
looking good rob.....yea i had the same problem.....it took about a week or so for the springs to set.....and rob are you still getting any understeer w/ 6k/8k spring rate? ive got 8k/8k and that keeps me glued pretty well, but i might go 10k in the rear to get a little oversteer out of it.....some of the suspension guru 8k front and 10k rear is the best setup for our cars for track.....
KC
KC
#192
Scooby Regular
iTrader: (5)
yeah the springs did settle quite fast tbh which was causing a few problems but got there in the end.
not getting any understeer that i have noticed, tend to get a slight amount of oversteer instead which is better, got the dampers set for everyday use on 15 clicks did have them on 20 but was a little to harsh for pot holed town centre driving I am sure i could feel a penny on the road truth be told lol.
Not sure if tyre choice has much to do with how it behaves, Iam currently running Pirreli P-ZERO Rosso's which have bloody good grip qualitys
had the geometry reset last friday to tarmac spec and handles allot better than before
not getting any understeer that i have noticed, tend to get a slight amount of oversteer instead which is better, got the dampers set for everyday use on 15 clicks did have them on 20 but was a little to harsh for pot holed town centre driving I am sure i could feel a penny on the road truth be told lol.
Not sure if tyre choice has much to do with how it behaves, Iam currently running Pirreli P-ZERO Rosso's which have bloody good grip qualitys
had the geometry reset last friday to tarmac spec and handles allot better than before
#193
Scooby Regular
Join Date: May 2009
Location: Oxfordshire, Xbox GT: Hawker Fury, Car: 330s Hatch
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Now I've found this I want one
(chants) Group buy, group buy, group buy...............
Carbon Fiber Vortex Generator Subaru Impreza/WRX 08-09 on eBay, also Body Modifications, Exterior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 27-Jun-09 16:54:17 BST)
Doesn't actually look like very good quality but its up on the roof maybe you wont notice too much right.......
he he he..........
(chants) Group buy, group buy, group buy...............
Carbon Fiber Vortex Generator Subaru Impreza/WRX 08-09 on eBay, also Body Modifications, Exterior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 27-Jun-09 16:54:17 BST)
Doesn't actually look like very good quality but its up on the roof maybe you wont notice too much right.......
he he he..........
#195
Been told to upload pictures properly - so here goes and hope you like...............
Lots done to it and most of mods listed here..
Project STI
Getting some arty shots done soon and will upload them to website along with the MY08 section update.
Cheers
Glenn
Revolution
Revolution Peformance Motorstore
Lots done to it and most of mods listed here..
Project STI
Getting some arty shots done soon and will upload them to website along with the MY08 section update.
Cheers
Glenn
Revolution
Revolution Peformance Motorstore
#196
awesome setup.....done well.....glad to have some tuner's in the UK working up the 08-09's.....did you guys change the rear exhaust section to a REMUS? tailpipes a little different from the revolution exhaust.....
#199
Hi
Thanks for the positive comments, we do like to work on tha latest models and try and keep ahead of the game in using the car everyday and test parts on road track and the mighty 'ring.
Ecutek mapped a while ago but the feature is in the latest J-Perf mag that's just landed in our office. Andy-F doing his magic as usual..........
Following only done 100 miles or so on offer...
Zero sports intake pipe kit - £50
Zero Sports Carbon airbox intake cover - £50 (the snorkel part)
Scorpion rear box (they make them for P-drive) £350
Also
Cool action II intercooler splitters (new) - £125
K&N panel filters - £35.99
Revolution cat back systems - £449 gives the rumble but not over lowd.
If anyone is after cheap set of rims, we have the 18x8.5 ET48 Rotas in gunmetal c/w 255/35/18 Yoko S-drives up for £500 inc vat. delivery extra. But will chuck in a free alignment on our hunter machine for anyone willing to travel up and have them fitted.
Also got a brand new set of Rota's (same as demo one's) with a choice of tyre options if anyone intersted - wheels only £400
Exhaust is still Revolution (3" full decat) system but were playing around with alternative tailpipe options and i get bored very quickly - hence on my 10th scoob;-))
Glenn
Revolution
Thanks for the positive comments, we do like to work on tha latest models and try and keep ahead of the game in using the car everyday and test parts on road track and the mighty 'ring.
Ecutek mapped a while ago but the feature is in the latest J-Perf mag that's just landed in our office. Andy-F doing his magic as usual..........
Following only done 100 miles or so on offer...
Zero sports intake pipe kit - £50
Zero Sports Carbon airbox intake cover - £50 (the snorkel part)
Scorpion rear box (they make them for P-drive) £350
Also
Cool action II intercooler splitters (new) - £125
K&N panel filters - £35.99
Revolution cat back systems - £449 gives the rumble but not over lowd.
If anyone is after cheap set of rims, we have the 18x8.5 ET48 Rotas in gunmetal c/w 255/35/18 Yoko S-drives up for £500 inc vat. delivery extra. But will chuck in a free alignment on our hunter machine for anyone willing to travel up and have them fitted.
Also got a brand new set of Rota's (same as demo one's) with a choice of tyre options if anyone intersted - wheels only £400
Exhaust is still Revolution (3" full decat) system but were playing around with alternative tailpipe options and i get bored very quickly - hence on my 10th scoob;-))
Glenn
Revolution
#200
Scooby Regular
Join Date: May 2009
Location: Berkshire
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Me! ME!
Hi
If anyone is after cheap set of rims, we have the 18x8.5 ET48 Rotas in gunmetal c/w 255/35/18 Yoko S-drives up for £500 inc vat. delivery extra. But will chuck in a free alignment on our hunter machine for anyone willing to travel up and have them fitted.
Glenn
Revolution
If anyone is after cheap set of rims, we have the 18x8.5 ET48 Rotas in gunmetal c/w 255/35/18 Yoko S-drives up for £500 inc vat. delivery extra. But will chuck in a free alignment on our hunter machine for anyone willing to travel up and have them fitted.
Glenn
Revolution
I'll PM you my contact details.
Cheers
W
#202
Scooby Regular
iTrader: (1)
Join Date: Aug 2006
Location: Newcastle
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Been told to upload pictures properly - so here goes and hope you like...............
Lots done to it and most of mods listed here..
Project STI
Getting some arty shots done soon and will upload them to website along with the MY08 section update.
Cheers
Glenn
Revolution
Revolution Peformance Motorstore
Lots done to it and most of mods listed here..
Project STI
Getting some arty shots done soon and will upload them to website along with the MY08 section update.
Cheers
Glenn
Revolution
Revolution Peformance Motorstore
cant wait to see some pro shots
pictures don' t do your car justice, some of the subtle gloss black on white colour coding looks very tasty up close and doesn't show too well in the pics
also really like the oz leggera's
cheers
matt
#203
Scooby Regular
Join Date: Sep 2003
Location: At the diesel pump...
Posts: 8,677
Likes: 0
Received 0 Likes
on
0 Posts
I'm never knocking my RC again. Its gone in to have the rattles fixed and I've got the courtesy car.
A 1.5 Impreza and its a bag of nails, its bloody awful and refuses to rev above 4K.
A 1.5 Impreza and its a bag of nails, its bloody awful and refuses to rev above 4K.
#205
Scooby Regular
Join Date: Dec 2003
Location: Derbyshire
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
#208
Scooby Regular
Thread Starter
Gauges next
Looking at getting some gauges and this is my plan. Got most of the bits, just need the OBD wifi sender and ground pin 4 on the head unit so the display doesn't go off when driving
Last edited by silver demon; 10 June 2009 at 07:52 PM. Reason: missed a picture