Notices
Member's Gallery Pictures of your pride and joy

08/09 Hatches, Stand up and show yourselves!!!

Old Apr 9, 2019 | 03:19 PM
  #17341  
Adw330s's Avatar
Adw330s
Scooby Regular
 
Joined: Mar 2015
Posts: 108
Likes: 1
From: North East
Default 330s exhaust

I’ve got the uprated pro- drive quad exit rear box If anyone’s interested......this is the upgraded 3.5” tip exhaust that came on the 330s cars.

better sound and larger tips than the small standard
ones....

Its just come off my car.

let me know.
Reply
Old Apr 10, 2019 | 07:01 PM
  #17342  
vulnax999's Avatar
vulnax999
Scooby Senior
20 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: May 2003
Posts: 4,375
Likes: 11
Default

Originally Posted by matt-c
Really?!?!?! Those are figures that seem kind of crazy for any Impreza.
Originally Posted by bioforger
38-40 lmao guy must be in top at 50mph lifting off at any opportunity and then tickling the throttle with a feather to keep the car moving.

Yep!

6th gear, about 60 - 70 but LOTS of 50 mph limits for smart motorway building ... over a 260 mile run, but as soon as back to normal motorway driving ( or even a hill ) or worse town driving, drops very rapidly ....
Reply
Old Apr 15, 2019 | 11:02 AM
  #17343  
Rusti's Avatar
Rusti
Scooby Regular
10 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Sep 2014
Posts: 1,629
Likes: 163
From: Hampshire
Default

quick question, whats the real world limit for power on a standard STi hatch turbo?
Reply
Old Apr 15, 2019 | 11:18 AM
  #17344  
vulnax999's Avatar
vulnax999
Scooby Senior
20 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: May 2003
Posts: 4,375
Likes: 11
Talking

Originally Posted by Rusti
quick question, whats the real world limit for power on a standard STi hatch turbo?
For safety or what can it make?

A remap on my std 330s took it to 360, then sports cat and remap to 374 bhp.

Common? wisdom on thes 2.5's was to keep it under 400, probably 370 ish until forged.


Mine did blow head gaskets and ringland failure after 3 1/4 years and 35000 miles !!!
Reply
Old Apr 15, 2019 | 12:17 PM
  #17345  
TheOriginalAquapanther's Avatar
TheOriginalAquapanther
Scooby Regular
 
Joined: Mar 2014
Posts: 177
Likes: 2
From: Scotland
Default

Originally Posted by Rusti
quick question, whats the real world limit for power on a standard STi hatch turbo?
I had mine mapped by Andy Forrest recently and I'm still on stock turbo, he mentioned around 380bhp being the most he'd look at
Reply
Old Apr 15, 2019 | 12:42 PM
  #17346  
Rusti's Avatar
Rusti
Scooby Regular
10 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Sep 2014
Posts: 1,629
Likes: 163
From: Hampshire
Default

Interesting stuff, definitely looking for safe numbers but it would seem that I can get quite a lot more from my 330 once the rebuild is completed, without needing to swap out the turbo straight away.
Reply
Old Apr 15, 2019 | 02:57 PM
  #17347  
Adw330s's Avatar
Adw330s
Scooby Regular
 
Joined: Mar 2015
Posts: 108
Likes: 1
From: North East
Default

I had 418bhp and 438 ft lbs from a billet vf48 with aquamist methanol injection.....spool was unreal and went very well.
Reply
Old Apr 16, 2019 | 07:30 AM
  #17348  
domino46's Avatar
domino46
Scooby Regular
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2011
Posts: 3,179
Likes: 265
From: www.bbscoobys.com
Default

I also had 400bhp from a billet vf48 , just pump fuel
Reply
Old Apr 16, 2019 | 04:14 PM
  #17349  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Is there a lowering seat bracket for the driver's side Recaro seat?
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.

Edit: I've found this: https://www.japanparts.com/parts/detail/20602

Last edited by fpan; Apr 16, 2019 at 04:27 PM.
Reply
Old Apr 16, 2019 | 09:23 PM
  #17350  
hedgecutter's Avatar
hedgecutter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,890
Likes: 708
From: far, far west
Default

Originally Posted by fpan
Is there a lowering seat bracket for the driver's side Recaro seat?
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.

Edit: I've found this: https://www.japanparts.com/parts/detail/20602
And you were also browsing some STI rear supports and spec c shocks, weren't you?
Reply
Old Apr 17, 2019 | 08:34 AM
  #17351  
Rob Day's Avatar
Rob Day
Scooby Regular
iTrader: (78)
 
Joined: Jul 2009
Posts: 9,451
Likes: 13
From: North West
Default

Originally Posted by hedgecutter
And you were also browsing some STI rear supports and spec c shocks, weren't you?
Items recently viewed is done by internet tracking cookies, so you wouldn't know this, so they must be items looked at last on that website (related website) on your machine. So I hand it to you that it was you looking at STI rear supports and Spec C shocks
Reply
Old Apr 17, 2019 | 09:09 AM
  #17352  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by Rob Day
Items recently viewed is done by internet tracking cookies, so you wouldn't know this, so they must be items looked at last on that website (related website) on your machine. So I hand it to you that it was you looking at STI rear supports and Spec C shocks
I think hedgecutter is teasing me as he knows suspension is my fetish

Btw, I have a creak from the driver's Recaro seat when cornering that is annoying, has anyone else experienced this and how have you solved it?
Reply
Old Apr 17, 2019 | 09:20 AM
  #17353  
hedgecutter's Avatar
hedgecutter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,890
Likes: 708
From: far, far west
Default

Originally Posted by Rob Day
Items recently viewed is done by internet tracking cookies, so you wouldn't know this, so they must be items looked at last on that website (related website) on your machine. So I hand it to you that it was you looking at STI rear supports and Spec C shocks
Fair cop. Guilty of extensive Japanparts browsing. Damn knowledgeable computer techs
Reply
Old Apr 17, 2019 | 09:21 AM
  #17354  
hedgecutter's Avatar
hedgecutter
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Sep 2010
Posts: 3,890
Likes: 708
From: far, far west
Default

Originally Posted by fpan
I think hedgecutter is teasing me as he knows suspension is my fetish

Btw, I have a creak from the driver's Recaro seat when cornering that is annoying, has anyone else experienced this and how have you solved it?
But Fpan didn't deny it !!
Reply
Old Apr 17, 2019 | 05:36 PM
  #17355  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by hedgecutter
But Fpan didn't deny it !!
I did look at the suspension the RA uses (yellow Bilsteins and STi pinks) although I am happy with the 20th anniversary's suspension so far.
When the dampers need replacing I will either replace them with the same or the setup from the RA.
Reply
Old Apr 17, 2019 | 06:27 PM
  #17356  
Don Clark's Avatar
Don Clark
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2003
Posts: 7,841
Likes: 834
From: Harpenden
Default

Originally Posted by fpan
I did look at the suspension the RA uses (yellow Bilsteins and STi pinks) although I am happy with the 20th anniversary's suspension so far.
When the dampers need replacing I will either replace them with the same or the setup from the RA.
Reply
Old Apr 17, 2019 | 09:01 PM
  #17357  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by Don Clark
Reply
Old Apr 18, 2019 | 01:06 AM
  #17358  
Adw330s's Avatar
Adw330s
Scooby Regular
 
Joined: Mar 2015
Posts: 108
Likes: 1
From: North East
Default results!

Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)

Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)

Last edited by Adw330s; Apr 18, 2019 at 01:09 AM.
Reply
Old Apr 18, 2019 | 07:52 AM
  #17359  
domino46's Avatar
domino46
Scooby Regular
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2011
Posts: 3,179
Likes: 265
From: www.bbscoobys.com
Default

Originally Posted by Adw330s
Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)

Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)

Reply
Old Apr 18, 2019 | 09:43 AM
  #17360  
Gambit's Avatar
Gambit
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: May 2003
Posts: 3,420
Likes: 282
From: Belfast
Default

Originally Posted by Adw330s
Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)

Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
got any graphs for both them?

im targeting about 420bhp on mine with a GT3071r / full 3" / ETS FMIC / ID 1050cc injectors etc but what your getting makes mine sound like i spent way too much money to achieve 400-420bhp! final piece of jigsaw is still to get injectors fitted tho
Reply
Old Apr 18, 2019 | 11:28 AM
  #17361  
urban's Avatar
urban
Scooby Regular
iTrader: (1)
 
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
Default

Originally Posted by fpan

Btw, I have a creak from the driver's Recaro seat when cornering that is annoying, has anyone else experienced this and how have you solved it?
Long time ago, but my old 330S drivers seat developed that creak too. The dealer replaced the seat brackets under warranty
Reply
Old Apr 18, 2019 | 12:17 PM
  #17362  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by urban
Long time ago, but my old 330S drivers seat developed that creak too. The dealer replaced the seat brackets under warranty
Thanks urban.
It comes from the front left of the driver's seat.
I've ordered a Kansai lowering seat bracket, hopefully that will solve it (if the seat bracket you refer to is the same item I am going to replace).
Reply
Old Apr 18, 2019 | 01:25 PM
  #17363  
urban's Avatar
urban
Scooby Regular
iTrader: (1)
 
Joined: Mar 2002
Posts: 12,566
Likes: 1
From: Never you mind
Default

I only remember seeing how much the the warranty claim invoice was to Subaru - approx Ł800, took them maybe half an hour to fit it
Reply
Old Apr 18, 2019 | 02:31 PM
  #17364  
CharlySkunkWeed's Avatar
CharlySkunkWeed
Scooby Regular
iTrader: (7)
 
Joined: Jun 2010
Posts: 3,499
Likes: 70
From: Bangor-Northern Ireland
Default

Originally Posted by urban
I only remember seeing how much the the warranty claim invoice was to Subaru - approx Ł800, took them maybe half an hour to fit it
Sure i now own that car and it still squeaked

I wd-40'd it and its been fine since.
Reply
Old Apr 18, 2019 | 02:59 PM
  #17365  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by urban
I only remember seeing how much the the warranty claim invoice was to Subaru - approx Ł800, took them maybe half an hour to fit it
Wow Ł800!!!
I'll take it out and have a look at some point, perhaps the metal strings/springs under the cushion are at fault.
Reply
Old Apr 18, 2019 | 03:42 PM
  #17366  
matt-c's Avatar
matt-c
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Jan 2005
Posts: 1,558
Likes: 125
From: Essex
Default

Common issue, mine did it with original and 330 Recaros.

Ive not worked out exactly what causes it.
Reply
Old Apr 18, 2019 | 09:03 PM
  #17367  
Adw330s's Avatar
Adw330s
Scooby Regular
 
Joined: Mar 2015
Posts: 108
Likes: 1
From: North East
Default

Originally Posted by Gambit
got any graphs for both them?

im targeting about 420bhp on mine with a GT3071r / full 3" / ETS FMIC / ID 1050cc injectors etc but what your getting makes mine sound like i spent way too much money to achieve 400-420bhp! final piece of jigsaw is still to get injectors fitted tho

Yeah got both graphs mate. PM me you’re email and I’ll send across. No matter how many times I try to upload on here it just will not work for me!
Reply
Old Apr 18, 2019 | 09:23 PM
  #17368  
gc8simon's Avatar
gc8simon
Scooby Regular
10 Year Member
Top Answer: 1
 
Joined: May 2015
Posts: 143
Likes: 57
From: Hull
Default

Recently picked up this Wrx-S for the other half.
Reply
Old Apr 19, 2019 | 10:05 AM
  #17369  
fpan's Avatar
fpan
Scooby Regular
15 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,434
Likes: 177
From: UK
Default

Originally Posted by Adw330s
Yeah got both graphs mate. PM me you’re email and I’ll send across. No matter how many times I try to upload on here it just will not work for me!
I've got the same problem uploading files from the computer here, don't know why.
Reply
Old Apr 19, 2019 | 10:19 AM
  #17370  
Don Clark's Avatar
Don Clark
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2003
Posts: 7,841
Likes: 834
From: Harpenden
Default

Originally Posted by fpan
I've got the same problem uploading files from the computer here, don't know why.
Where are you hosting your pictures?
Reply

Thread Tools
Search this Thread

All times are GMT +1. The time now is 08:34 PM.