The car looked in the supplement Steven, even through my eyes...

 

Steven, Just need details from nick and then pictures are all go

 

cheers david

Floyd, I took it off my car to put on Marks car for Silverstone, as i had stuffer springs and adjustable top mounts, which allowed us to get to 0.5 degree of negative camber.

 

Great news Steven Glad to hear that after all the ups & downs you've been through this year you haven't lost interest in everyone's favourite Wagon

 

Well, progress may be made tomorrow.

I now have my Dog box in my posession, thanks to Mark at Scoobyclinic for sorting it quickly, so if i can get away from the house tomorrow, i will be refitting it.

Also got new insulated fuel rails to install, and a few other bits and bobs.

Steven

 

I'd guess as steven phoned me today and asked if he could pinch parts from my car, that he got the box in

 

Yup box in, cheers David, I will have to ask Andy for my original bit back

New fuel rails in

Few tweeks to do to exhaust system so the wastegate returns into the downpipe, so it will be quieter. Oil change to do, and then she is good to go!

Might go to elvington on 9th December

 

More pictures 'cos I can't read

F

 

9th December !!! Whats on ??? Glad your cars getting sorted , cheers Alan.

 

What bit have I got Steven ?

Andy

 

Bracket on top of the box.

 

Andy, i think you may have it still attached to your box, but i may be wrong, cant find mine anywhere, its not a problem, will get another from somewhere.

Not taken any pictures tbh, just got on and done things, it was bloody cold in the barn this weekend

All finished, parts taken back off ready for wrapping or ceramic coating, cant decide just yet.

 

Steven, I have a couple of these in the garage, I'll post you one tomorrow.

---john---

 

Cheers John, your a star, dont suppose you have a spare bolt for the bottom hole too?

 

Javelin Trackdays | Book your trackday here

 

yes looked awesome and gave me a few ideas excellent car, is it standard weight ?

 

Yes, it is full standard weight, no body work or interior has been removed.

 

Bottom hole ?

P.S. there's a 4x4 knocking around here with P2SPD on it

 

£95 thats a bit steep isn't it??

 

john, its the bracket at the top of the gearbox that the pitch stop mount bolts to.

Its the bolt that goes through the lower hole of this bracket, and then through the gearbox. ie bolts the bracket to the box.

What 4x4?

Daz, its not too bad TBH, full day, open pit lane, should be good.

 

Glad it is up and running again Steven!

agree. Brands is 140 for the same this Friday.

Simon

 

Not quite running yet.

 

oops.. well nearly..

you think there is enough heat entering the fuel rails to warrent the insulation? inlet spacers not enough?

Simon

 

The new rails came from Carl insulated, look very good. Apparently in testing he found that the rails absorbed a lot of heat, so setup the insulation mod on the rails.

 

nice.. await pictures.. will email Carl for details

 

Just going back to the fuel rails for a minute...

How are the rails insulated? Is there not a risk that if they do heatsoak the insulation with keep the heat in?

Andrew...

 

Its a rectangular block of insulation material that sits between the Inlet manifold and a CNC'd section of the rail, where the bolts go through. I didnt take any pics, but it made sense to me, just like header tank insualtion i guess.

Cant find the thread on here with details of them, but i was convinced they would work, time will tell i guess.

 

Tis alive!!!!!

 

But how does it RUN?

Lost the plot on what was done, but wasn't it the box?

Projects has gone into hibernation at the mo so great for something fresh!

 

Fairly well at the moment, only running wastegate pressure (7psi) untill i can get Pat to check it out.

PPG Dog box now installed with my original diffs.
Altered up pipe and wastegate with wastegate now venting back into the downpipe, so its a damned sight quieter when its on boost.
New fuel rails from Carl Davey.

Thats it, really, oh! and oil change too.