Advice on large k&n air filter
Sorry to hijack the thread but I need a new filter too.
I've got a Piper cone on atm but it's missing chunks of foam for some reason.
I was gonna replace it for another piper or K&N because they are the makes I grew up with, but I saw that a few tuners are selling Perrin which I've never heard of.
Are Perrin better than K&N and Piper?
I've got a Piper cone on atm but it's missing chunks of foam for some reason.
I was gonna replace it for another piper or K&N because they are the makes I grew up with, but I saw that a few tuners are selling Perrin which I've never heard of.
Are Perrin better than K&N and Piper?
Perrin is in principle same as Piper,its foam based filter,I would personally go with K&N or AEM or Green cotton induction kit if you wan to run or need to run induction kit
Thanks,Jura
I'm in the market for an induction kit. I've narrowed my search down to the RCM or the K&N typhoon. I'm prepared to pay the extra £60 or so for the typhoon based on the fact it comes complete with a nice heat shield with foam seal that should help prevent the dreaded heat soak. Ready to pull the trigger on this now but I see a lot of folk are running the RCM instead. Is this a cost, brand name or performance thing. Does it not suffer from tremendous best soak without a proper heat shield. Any help would be great.
Cheers,
Melly
Cheers,
Melly
I'm in the market for an induction kit. I've narrowed my search down to the RCM or the K&N typhoon. I'm prepared to pay the extra £60 or so for the typhoon based on the fact it comes complete with a nice heat shield with foam seal that should help prevent the dreaded heat soak. Ready to pull the trigger on this now but I see a lot of folk are running the RCM instead. Is this a cost, brand name or performance thing. Does it not suffer from tremendous best soak without a proper heat shield. Any help would be great.
Cheers,
Melly
Cheers,
Melly
K&N Typhoon is kit which I wouldn't use on my car,this kit doesn't have best reputation on Subaru
I would recommend RCM Induction kit,we run RCM Induction kit without the heatshield or without the cold air and we are never have any issues with heatsoak
Here is it how it sits in the engine bay,although we are run mafless and custom hard inlet pipe
Hope this helps
Thanks,Jura
Sadly,wagon has been broken for parts 1 year ago,but here are threads
https://www.scoobynet.com/projects-4...s-project.html
And here has been spec
https://www.scoobynet.com/subaru-444...18-000ono.html
Hope this help
Thanks,Jura
Scooby Regular
Joined: May 2016
Posts: 252
Likes: 31
From: Eire
Is the rcm worth the extra £30 over a k&n set up (for fmic piping)
k&n.
http://scoobyworld.co.uk/catalog/pro...oducts_id=1296
rcm
https://rogerclarkmotorsport.co.uk/s...wrx-sti-01-07#
for a blob sti
k&n.
http://scoobyworld.co.uk/catalog/pro...oducts_id=1296
rcm
https://rogerclarkmotorsport.co.uk/s...wrx-sti-01-07#
for a blob sti
,but both kits will function well...the RCM kit is a bit different though as their trumpet has more R&D involved specifically for Subarus.SJ.
Scooby Regular
Joined: May 2016
Posts: 252
Likes: 31
From: Eire
Scooby Regular
Joined: May 2014
Posts: 2,280
Likes: 79
From: Glasgow
Scooby Regular
Joined: May 2014
Posts: 2,280
Likes: 79
From: Glasgow
Scooby Regular
Joined: May 2014
Posts: 2,280
Likes: 79
From: Glasgow
Scooby Regular
iTrader: (7)
Joined: Apr 2007
Posts: 545
Likes: 0
From: on the computer.... obviously!
Scooby Regular
Joined: May 2016
Posts: 252
Likes: 31
From: Eire
they get them from RCM = 10 DAYS wait...
Scooby Regular
Joined: Apr 2014
Posts: 495
Likes: 2
From: Leicester
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM