Guesty

Is there anyway to have a chirp when locking and unlocking the car ?

CharlySkunkWeed

iTrader: (7)

Don't think so. Book says Australia models only or something.

SmurfyBhoy

Works on my blobeye.


Today i learned i can make my car bleep when i lock and unlock it.

No more walking back to check its locked.

Use keypad down by your knee

Open car
Key in ignition on
Press 7
Key out
Lock
Beep

Some other features here

http://www.scoobypedia.co.uk/uploads/Knowledge/sigma_m30_codes.pdf

Don Clark

Different alarm on the Hatch onwards Sigma S32/34 (depending upon push button start or not)

To activate Arm/Disarm Indication Tones

*17856 *440 then #

Arm/Disarm Indication Tones - On/Off

*17856 *000 * 0 or * 1 then # where * 0 (off)

CharlySkunkWeed

iTrader: (7)

Does this work on the Keyless entry models ?

Don Clark

Yes you have an S32 alarm.

Check the base of the driverside B pillar where the VIN plate is.
You will find a sticker referencing the alarm

CharlySkunkWeed

iTrader: (7)

Will do.

I had a read at the book and it said Australia only (or may have been door open warning dings)

I did ask all these questions on the Hatch thread when i first got it but didn't get far lol.

I wanted alarm chirp activated , and door open dings switched off. Will get a look tomorrow.

Guesty

Mine is the s34 acording to car and booklet

Don Clark

S32, S34 same alarm "series S" (with the S34 you get new RADIO KEYS SO MAYBE FITTED TO THE NON KEYLESS ENTRY CARS)



http://www.scorpionauto.com/home/pro...h?search=sigma

Guesty

I dont have that sticker and on manual online it says total closure by holdin button down but it dont work on my car :/

CharlySkunkWeed

iTrader: (7)

THANKYOU

It worked !
It seems to be a long tone for locked , short tone for unlocked.

Don't suppose you know of a way to turn off the "door open" dings ? Won't be alarm related i imagine but you may know

Guesty

Ive just tried this now mu car led flashing green and red and car wont start

CharlySkunkWeed

iTrader: (7)

Is it making the tone now ? Or has nothing changed other than it won't start .

Guesty

It started now and no still no noise what did you use