Brembos on classic - clearance question
#1
Scooby Regular
Thread Starter
Brembos on classic - clearance question
Thinking of doing the full front and rear brembo conversion on my classic. My concern is that I have 18s on at the moment and they rub a little bit on the rear.
If I fit the brembos from an 06STI I understand that I'll need spacers for the wheels to clear the calipers - I'm assuming if I use say 10mm spacers, I'll then have to get the arches rolled to allow the wheels to clear?
Suspension is standard but will be lowered a little in the future (Eibachs)
ta
If I fit the brembos from an 06STI I understand that I'll need spacers for the wheels to clear the calipers - I'm assuming if I use say 10mm spacers, I'll then have to get the arches rolled to allow the wheels to clear?
Suspension is standard but will be lowered a little in the future (Eibachs)
ta
#2
Scooby Regular
o6 STi has the wrong PCD on the discs to fit your car straight off............either you need the discs re-drilled or change them for pre05 discs.........
what 18" wheels do you have?? some clear no issue, but if you are already rubbin gthe rears with std set-up then a 10mm spaced wheel is going to foul regardless of arch rolling............
what 18" wheels do you have?? some clear no issue, but if you are already rubbin gthe rears with std set-up then a 10mm spaced wheel is going to foul regardless of arch rolling............
Thread
Thread Starter
Forum
Replies
Last Post
bro82
General Technical
4
17 September 2015 07:41 AM