V45DSM

How do I get the rear brake discs off!!?? I've removed the caliper and the 32mm centre nut, anything else?

I need the car in an hour so any help will be gratefully recieved!

pslewis

Are there 2 threaded holes like on the fronts? To put bolts in to release?

Sorry if not!

Good Luck!

Pete

julian N/W wrx my93

tap then slowy but firmy with a hammer on opp sides.

V45DSM

Thanks gents,

When I back the disk off with some set screws, something seems to be jammed in the underside of the top hat - I've tapped the disc with a hammer but its not coming off. I've put it back together now, I'll have to let a garage bother about it.

Cheers,

WR1 Ant

Firstly you don't need to take the 32mm nut off and secondly was the handbrake off as discs wont come off with h/b on..........

V45DSM

Yes and the hand the handbrake lever now pulls up much further!

crusher

Aren't the pads for the handbrake on the inside of the disc?. They need to be backed off the disc or else when you take off the disc it can break parts of the assembly...there was a thread about this problem a few weeks ago...There is an inspection hole on the backplate...you remove a grommet and then use a flat blade screwdriver to turn the adjuster and release the assembly...the adjuster is orientated vertically.

V45DSM

Too late! There's ******* springs and clips every where! Doh!