DarkusDarkus

I'm having trouble finding the plates that go on the back of the brakes for a 2004 forester sti.
As the hub is 5x100 will any of the legacy or impreza ones fit. I've found some forester specific ones but they seem to be twice as expensive, any advice would be appreciated thanks

ej20boy

do the brz/gt86 ones fit as they are based on a 100 pcd wrx running gear

lockheed

iTrader: (1)

ICP do them but i believe you need to split the inner and outer bearings there fore making it quite expensive to replace .

Don Clark

Front Brake dust shields the same as MY01-04 WRX STI P/N 26290FE050 (LH same as RH)

But out of stock at ICP https://www.importcarparts.co.uk/par...y=&searchPart=

ej20boy

not on gt86/brz which has wrx hubs.
​​​three bolts behind disc

Don Clark

I believe he thought OP meant Back brakes (back of brakes), unless he did
In which case Rear Brake dust shields and handbrake back plates RH: 26704FE000 LH: 26704FE010

both out of stock at ICP

https://importcarparts.co.uk/parts-info.asp?id=6884

https://importcarparts.co.uk/parts-info.asp?id=6880

lockheed

iTrader: (1)

On the forester sti you need to split to fit ....... Its a sandwich !

DarkusDarkus

Thanks for all the replies much appreciated I contacted ICP and was informed that a full set of 4 dust shields would be £235 which I thought was a little pricy. I'll check with them again.. One of them is grinding I presume it's rust so thought would replace all of them

Don Clark

The rears include the back plate for the handbrake mechanism/shoes so more expensive.

DarkusDarkus

Thanks Don for taking the time to explain
I've noticed you help alot of people out on here good on you mate cheers

stockcar

if your worried about the expense simply remove the front ones altogether, in the grand scheme of things they offer very little..........