What psi for track?
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2012
Location: pontypridd
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
What psi for track?
Hi all just got some nankang ns2r tyres for the scoob they are 235/45/17.
So I'm wondering what sort of psi to set them at for a track day?? they are also the 120 compound.
Cheers greg
So I'm wondering what sort of psi to set them at for a track day?? they are also the 120 compound.
Cheers greg
#2
Scooby Regular
iTrader: (3)
Join Date: Jan 2013
Location: Oxford
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
This is how I find the right pressure with new tyres,
With the tyres cold I would make sure you put them to oem pressures.
Take it for a drive see how it feels.
Then starting at front add 2 psi at time and see how it affects the car, if it's a improvement add another two psi,
If then it starts to feel worse reduce it by 1 psi until you get the front feeling good,
Then repeat with the process with the rear,
You should then have your preferred front and rear tyre pressures for them particular tyres,
On a track day it a case of maintaining them pressures,
Obviously after a few laps the air in the tyre gets hot and expands causing your tyre to over inflate, a lot of people think there tyres go off after a few laps and start understeering. Over inflation due to heat is usually the reason,
Best thing to do is after the tyres have got up to temperature is to pull in and adjust them back to where they should be,
Depending on the track layout it's not uncommon to see higher pressures on one side to another due to one tyre working harder than another.
Just remember if you've had to let pressure out the tyres due to air expanding with heat when the tyres cool down they will now be under inflated, so your have to re inflate them usually the morning after.
Having your tyres filled with nitrogen can help reduce the affect of pressure change from heat as it's more stable then air.
Mines running 17'' yoko Ad08r I find they work best at 34 front 31 rear
That's only 1 psi higher in the front and 2psi higer in the rear.
Hope this helps.
With the tyres cold I would make sure you put them to oem pressures.
Take it for a drive see how it feels.
Then starting at front add 2 psi at time and see how it affects the car, if it's a improvement add another two psi,
If then it starts to feel worse reduce it by 1 psi until you get the front feeling good,
Then repeat with the process with the rear,
You should then have your preferred front and rear tyre pressures for them particular tyres,
On a track day it a case of maintaining them pressures,
Obviously after a few laps the air in the tyre gets hot and expands causing your tyre to over inflate, a lot of people think there tyres go off after a few laps and start understeering. Over inflation due to heat is usually the reason,
Best thing to do is after the tyres have got up to temperature is to pull in and adjust them back to where they should be,
Depending on the track layout it's not uncommon to see higher pressures on one side to another due to one tyre working harder than another.
Just remember if you've had to let pressure out the tyres due to air expanding with heat when the tyres cool down they will now be under inflated, so your have to re inflate them usually the morning after.
Having your tyres filled with nitrogen can help reduce the affect of pressure change from heat as it's more stable then air.
Mines running 17'' yoko Ad08r I find they work best at 34 front 31 rear
That's only 1 psi higher in the front and 2psi higer in the rear.
Hope this helps.
Last edited by InTurbo; 16 September 2015 at 10:52 PM.
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2012
Location: pontypridd
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
This is how I find the right pressure with new tyres,
With the tyres cold I would make sure you put them to oem pressures.
Take it for a drive see how it feels.
Then starting at front add 2 psi at time and see how it affects the car, if it's a improvement add another two psi,
If then it starts to feel worse reduce it by 1 psi until you get the front feeling good,
Then repeat with the process with the rear,
You should then have your preferred front and rear tyre pressures for them particular tyres,
On a track day it a case of maintaining them pressures,
Obviously after a few laps the air in the tyre gets hot and expands causing your tyre to over inflate, a lot of people think there tyres go off after a few laps and start understeering. Over inflation due to heat is usually the reason,
Best thing to do is after the tyres have got up to temperature is to pull in and adjust them back to where they should be,
Depending on the track layout it's not uncommon to see higher pressures on one side to another due to one tyre working harder than another.
Just remember if you've had to let pressure out the tyres due to air expanding with heat when the tyres cool down they will now be under inflated, so your have to re inflate them usually the morning after.
Having your tyres filled with nitrogen can help reduce the affect of pressure change from heat as it's more stable then air.
Mines running 17'' yoko Ad08r I find they work best at 34 front 31 rear
That's only 1 psi higher in the front and 2psi higer in the rear.
Hope this helps.
With the tyres cold I would make sure you put them to oem pressures.
Take it for a drive see how it feels.
Then starting at front add 2 psi at time and see how it affects the car, if it's a improvement add another two psi,
If then it starts to feel worse reduce it by 1 psi until you get the front feeling good,
Then repeat with the process with the rear,
You should then have your preferred front and rear tyre pressures for them particular tyres,
On a track day it a case of maintaining them pressures,
Obviously after a few laps the air in the tyre gets hot and expands causing your tyre to over inflate, a lot of people think there tyres go off after a few laps and start understeering. Over inflation due to heat is usually the reason,
Best thing to do is after the tyres have got up to temperature is to pull in and adjust them back to where they should be,
Depending on the track layout it's not uncommon to see higher pressures on one side to another due to one tyre working harder than another.
Just remember if you've had to let pressure out the tyres due to air expanding with heat when the tyres cool down they will now be under inflated, so your have to re inflate them usually the morning after.
Having your tyres filled with nitrogen can help reduce the affect of pressure change from heat as it's more stable then air.
Mines running 17'' yoko Ad08r I find they work best at 34 front 31 rear
That's only 1 psi higher in the front and 2psi higer in the rear.
Hope this helps.
Thanks mate some great info for me there!
I have used these tyres in my last track day and off the top of my head they were 35 at the front and 32 on the rear but that was from cold (normal road driving) without checking them through the day I found them really good but towards the afternoon could feel the back end starting to come out.
Will do as you have said though and will take yourtips on board cheers
#4
Scooby Regular
iTrader: (3)
Join Date: Jan 2013
Location: Oxford
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Thanks mate some great info for me there!
I have used these tyres in my last track day and off the top of my head they were 35 at the front and 32 on the rear but that was from cold (normal road driving) without checking them through the day I found them really good but towards the afternoon could feel the back end starting to come out.
Will do as you have said though and will take yourtips on board cheers
I have used these tyres in my last track day and off the top of my head they were 35 at the front and 32 on the rear but that was from cold (normal road driving) without checking them through the day I found them really good but towards the afternoon could feel the back end starting to come out.
Will do as you have said though and will take yourtips on board cheers
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM