CLUTCH NEED AND SUM HELP!!!!
#1
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: Dorset
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
CLUTCH NEED AND SUM HELP!!!!
Hi all im after a clutch for my 1995 WRX (import) Bought one off ebay and had it fitted today, For sum reason it doesnt fit. breif explanation why it doesnt fit, it seems the middle part of clutch, is flush with the springs and other metal parts. if i sit the cluth on a metal flat surface (work bench) as if it was against the flywheel, and spin/rotate the clutch every part of the clutch touches the bench. think its a manufacture problem. Im confused?? Is it the fact its the wrong clutch or something else.
Cheers All
Cheers All
#3
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: Dorset
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT
HERE IS THE EBAY LINK OF THE CLUTCH WHICH WOULDNT FIT
HERE IS THE EBAY LINK OF THE CLUTCH WHICH WOULDNT FIT
#4
Scooby Regular
iTrader: (5)
Join Date: Jul 2010
Location: west midlands
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
are you putting the clutch plate the right way round? the flat part to the flywheel and the raised part with the springs goes into the pressure plate where the release bearing sits.
#5
Scooby Regular
Thread Starter
Join Date: Jan 2010
Location: Dorset
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
yeh puttin it round the right way mate, the clutch is catchin the bolts holding the flywheel on. im actually thinkin now if its got an uprated flywheel on it which is makin the new clutch not work. totally confused
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post