martyboi

hi every1 i am lookin for another dumpvalve to fit my bug eye wrx as last 1 started to leak
also fitted a flame kit to the car i already decated the exhaust but still no flames wil the dumpvalve help?
many thnks

scooby46

iTrader: (2)

ive got an aftermarket baileys dumpvalve if your intrested. pm me

biggazvr6

iTrader: (8)

Take the re circ pipe iff the factory recirc valve, bung up the end of the pipe you take off so you don't get un metered air into engine and bobs your uncle. You get a DV designed by subaru that won't keak under boost, and sound as good as a DV. Thats all ive done with my standard recirc valve on mine!!! IF you think it boll*cks, try it!

Steve001

iTrader: (7)

see your OTHER thread on the same subject

martyboi

thnks m8 il give it ago wil it improve my flamer kit

cjquicksilver

iTrader: (23)

i had a flamer on my evo, the way i got it to work was rev up the car, as it was revving down about half way turn the flamer on, seemed to only work as the car was high revving and decelerating
hope this helps

martyboi

tht was a good idea but it dont idle properly

biggazvr6

iTrader: (8)

Was that a reply to my post?

If you fit any aftermarket D/V it won't idle properly, it always makes them idle rough.

Thats why the opinion on dumpvalves varies.

If you want noise and wooshing, but suffer poor idle and the possibility of damagin your engine due to it running lean because meterd air escapes, then crack on.

IMO don't fit a DV unless you HAVE to like me. If i didn't have to have one, id still be running with my recirc valve!