Totally p***** off!
#1
Totally p***** off!
Over the last few weeks I have been getting the bits together to fit a Newage IC to the Classic.
Today it all came together ............................................or so I thought
I stripped out the old IC...............easy.
Stripped out the piping that connects to the induction pipe and and it came off a little too easy........................................
F**K
The connector that the pipe from the DV goes onto has been kinked in on itself as it's only plastic and when I try and connect the new pipe and tighten the spring clip or jubilee clip it slides off
So, has anyone fitted posh induction piping that goes to the turbo?
The bit between the elbow and the turbo itself? Not the airbox, not the elbow but the next bit.
HELP!
If I fell in a bucket of tit's at the moment I'd come out sucking my thumb!
Today it all came together ............................................or so I thought
I stripped out the old IC...............easy.
Stripped out the piping that connects to the induction pipe and and it came off a little too easy........................................
F**K
The connector that the pipe from the DV goes onto has been kinked in on itself as it's only plastic and when I try and connect the new pipe and tighten the spring clip or jubilee clip it slides off
So, has anyone fitted posh induction piping that goes to the turbo?
The bit between the elbow and the turbo itself? Not the airbox, not the elbow but the next bit.
HELP!
If I fell in a bucket of tit's at the moment I'd come out sucking my thumb!
Last edited by The Trooper 1815; 22 May 2009 at 09:41 PM.
#2
Scooby Regular
iTrader: (100)
Join Date: Oct 2008
Location: Planet Earth
Posts: 13,684
Likes: 0
Received 0 Likes
on
0 Posts
Ian I don't know if he can help but you could try PM'ing adge and see if he can help, he runs adgespeed and I have bought a few bits and pieces from him.
If he cannot help then he will try and get it for you.
Google adgespeed and you should be able to find his website and from that his mobile number.
If he cannot help then he will try and get it for you.
Google adgespeed and you should be able to find his website and from that his mobile number.
Trending Topics
#8
Kev,
I am thinking of putting in a metal sleeve to solve the problem but it's a pig to get at and I may as well get a replacement in and fitted.
It's OK at the moment but I had sold the IC and DV to someone and I have had to let them down.
I think you mean this one
http://www.merlinmotorsport.co.uk/p7...duct_info.html
I am thinking of putting in a metal sleeve to solve the problem but it's a pig to get at and I may as well get a replacement in and fitted.
It's OK at the moment but I had sold the IC and DV to someone and I have had to let them down.
I think you mean this one
http://www.merlinmotorsport.co.uk/p7...duct_info.html
Last edited by The Trooper 1815; 22 May 2009 at 10:09 PM.
#9
Scooby Regular
iTrader: (100)
Join Date: Oct 2008
Location: Planet Earth
Posts: 13,684
Likes: 0
Received 0 Likes
on
0 Posts
Ian don't know if this is the hose you are after but there is a Perrin version on eBay as below:
BRAND NEW PERRIN 3INCH TURBOHOSE FOR SUBARU IMPREZA STI on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 06-Jun-09 17:08:06 BST)
Don't know if this helps.
BRAND NEW PERRIN 3INCH TURBOHOSE FOR SUBARU IMPREZA STI on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 06-Jun-09 17:08:06 BST)
Don't know if this helps.
#13
Scooby Regular
iTrader: (3)
Kev,
I am thinking of putting in a metal sleeve to solve the problem but it's a pig to get at and I may as well get a replacement in and fitted.
It's OK at the moment but I had sold the IC and DV to someone and I have had to let them down.
I think you mean this one
SAMCO Hose Kit-SUBARU IMPREZA WRX/Sti VERSIONS 5&6 INDUCTION(1) Samco Part-TB121
I am thinking of putting in a metal sleeve to solve the problem but it's a pig to get at and I may as well get a replacement in and fitted.
It's OK at the moment but I had sold the IC and DV to someone and I have had to let them down.
I think you mean this one
SAMCO Hose Kit-SUBARU IMPREZA WRX/Sti VERSIONS 5&6 INDUCTION(1) Samco Part-TB121
The OE pipes go brittle and can split after a while and even the oe pipes new cost a fortune. I think a metal sleeve is worth a shot other than that try awesome imports for a good secondhand replacement.
#15
Scooby Regular
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
There are cheaper versions out there than Samco, autobahn etc
SUBARU WRX STI 1999-2000 TURBO AIR INTAKE PIPE SILICONE on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 27-May-09 18:16:59 BST)
The standard subaru ones are £100+ i believe though so may be worth paying the extra for the Samco.
SUBARU WRX STI 1999-2000 TURBO AIR INTAKE PIPE SILICONE on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 27-May-09 18:16:59 BST)
The standard subaru ones are £100+ i believe though so may be worth paying the extra for the Samco.
#18
Scooby Regular
iTrader: (12)
Join Date: Mar 2009
Location: in a house
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
sorry to hear that mate. i split mine when i did my turbo. right by where it joins the turbo. not a happy bunny as i have seen the prices. but i may settle for a cheaper one as things are a lil tight at the moment.
#26
Right then. One of the SWS members as gone and bought one of these for me, as a favour and without being asked.
I put a post up not long ago saying how awesome the guys on here can be.
This is just another example. Truly ...........................
I put a post up not long ago saying how awesome the guys on here can be.
This is just another example. Truly ...........................