WHERE IN S. WALES FITS GAUGES, THANKYOU IN ADVANCE
09 May 2009, 01:38 PM
#1
Scooby Newbie
Thread Starter
Join Date: May 2009
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
WHERE IN S. WALES FITS GAUGES, THANKYOU IN ADVANCE
HI, JUST BOUGHT 51 PLATE WRX AND AM DYING TO HAVE GAUGES FITTED, IT WOULD BE REALLY HELPFUL IF SOMEONE COULD POINT MY IN THE RIGHT DIRECTION OF SOME PLACE THAT INSTALLS THEM, OR WANTS TO EARN SOME MONEY THEMSELVES. IF I BUY THREE GAUGES AND HOLDER DO I NEED TO BUY ANYTHING ELSE. THANKYOU IN ADVANCE AND LOOK FORWARD TO HEARING FROM YOU.
09 May 2009, 02:23 PM
#2
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Hi Gav, firstly welcome to scoobynet 
To fit the guages you will need the senders and wiring too. Dave Coe in Gorseinon, Swansea should fit them for you. A few of the boys, myself included, use him as he knows his stuff with Subaru's.
David Coe Auto Engineering Centre. 4x4 / Performance Car Specialists
To fit the guages you will need the senders and wiring too. Dave Coe in Gorseinon, Swansea should fit them for you. A few of the boys, myself included, use him as he knows his stuff with Subaru's.
David Coe Auto Engineering Centre. 4x4 / Performance Car Specialists
09 May 2009, 10:41 PM
#3
Scooby Senior
iTrader: (12)
Join Date: Apr 2006
Location: south wales rhondda
Posts: 4,067
Likes: 0
Received 0 Likes
on
0 Posts
depends on the gauges you buy ,you will need oil pressure adapter that fits behind the alternator to keep your original pressure sensor and run the gauge the same time and if you go for oil temp you need an adapter bolt that will fit to the blank plug on number 3 cylinder to give the best temp reading , don't go for the sandwich plate adapter that fits between the oil filter as when you run gauges from them they dont give true oil temp readings as for turbo gauge that will just need some vacuum pipe to the manifold hope this helps
Last edited by The Stitcher; 09 May 2009 at 10:42 PM. Reason: text
11 May 2009, 05:50 PM
#4
Scooby Newbie
Thread Starter
Join Date: May 2009
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
gauge fitting
THANKS FOR THE REPLIES. DAVID COE SAID IT WOULD COST ROUGHLY 150, BUT HE HAS SAID THAT I WILL HAVE TO USE SANDWICH PLATE, WHICH A LOT OF YOU SAY NOT TO USE. HAVE ANY OF YOU HEARD OF ENDLICOTT PERFORMANCE AS HE SIAD HE HAS DONE A FEW AND THAT IT WOULD COST APPROX 80 FITTING. IF ANYONE KNOWS WHAT THEY ARE DOING FITTING WISE WITHOUT THE SANDWICH PLATE AND WANTS TO EARN 100 POUNDS, TO FIT THEM, THEN PLEASE LEAVE ME A MESSAGE, THANKS AGAIN FOR THE REPLIES AND HOPEFULLY SOMEONE ON HERE CAN FIT THEM FOR ME
11 May 2009, 09:01 PM
#5
Scooby Senior
iTrader: (12)
Join Date: Apr 2006
Location: south wales rhondda
Posts: 4,067
Likes: 0
Received 0 Likes
on
0 Posts
THANKS FOR THE REPLIES. DAVID COE SAID IT WOULD COST ROUGHLY 150, BUT HE HAS SAID THAT I WILL HAVE TO USE SANDWICH PLATE, WHICH A LOT OF YOU SAY NOT TO USE. HAVE ANY OF YOU HEARD OF ENDLICOTT PERFORMANCE AS HE SIAD HE HAS DONE A FEW AND THAT IT WOULD COST APPROX 80 FITTING. IF ANYONE KNOWS WHAT THEY ARE DOING FITTING WISE WITHOUT THE SANDWICH PLATE AND WANTS TO EARN 100 POUNDS, TO FIT THEM, THEN PLEASE LEAVE ME A MESSAGE, THANKS AGAIN FOR THE REPLIES AND HOPEFULLY SOMEONE ON HERE CAN FIT THEM FOR ME
as it gives the wrong readings and is a quick cheap way of doing it 
what impreza you got mate ??? year ?? and where you from ? and what you got just gauges ?? please pm me and i will talk you through what you need and maybe sort something out thats if i get five mins
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
