axgt_bwaii

iTrader: (6)

as above. ive got a 93 wrx. have drivers spring twisting in the top cup. presume its the top bearing or cup worn. ive bought new dampers springs and now id like the lot for the top. front and rear.

im not looking for adjustable. standard new top mounts, bearings and spring cups is what im after

where can i get these? dont want any of the "ebay cheese".

cheers
stew

slipstream_uk

iTrader: (1)

Ive seen kyb tops selling on the USA ebay, if that helps.

The rookie

iTrader: (1)

Porly fitted springs can cause this, either by not being seated properly in the cup or the cup being twisted.

Simon

axgt_bwaii

iTrader: (6)

cheers for advice but ive reseated these at least 10 times.

The rookie

iTrader: (1)

And what was the bearing condition like when they were apart?

Is the thin spacer between top spring cup and topmount, I fixed a car where that had been lost so the seat cup fouled the top mount...

Simon

axgt_bwaii

iTrader: (6)

i will have to double check on that. the bearing had no play off the car and span round nice. once on the car even still on jacks the spring is trying to twist and isnt happy.

any chance of picture what should be in the top mount?

lookout

Whiteline Automotive - performance handling and suspension products. car spring coil shock damper swaybar sway bar anti-sway bush bushes australia australian whiteline automotive performance road holding turn-in camber caster toe in vehicle hot 4 v8

axgt_bwaii

iTrader: (6)

yes ive seen those in jp. cant find a price on them tho. rcm do a setof 4 group n mounts for £310. bloody rip off but got to be paid.

lookout

The Whiteline 'group n', rubber off-set ones are about £130 for a set of 2. For road use I think these are better than the spherical bearing topmounts that a lot of people have with their coil overs. Less noise, longer lasting and still a fair bit extra caster.

axgt_bwaii

iTrader: (6)

do i want caster/camber on my road car? i have a track car too but the car im talking about is just a quick (daily) road car.

lookout

Extra caster is great on a road car as well. It calms the car down on the straights, nicer turn-in and more front end grip.

The rookie

iTrader: (1)

Between the tophat and the top spring cup you should have a large washer, quite thick, and slightly cupped to follow the top surface of the spring cup.

Part no4 on Front shock absorber, Subaru FORESTER ? Subaru parts catalog I know that's foz - that's what my shortcut is to, but its the same part.

Simon

axgt_bwaii

iTrader: (6)

yeah i remember that part. flat side down?

The rookie

iTrader: (1)

It has the same profile as the spring cup, and should sit snug on top. It has no flat side though, one is convex, one concave, the concave side sits on and matches the convex top of the spring cup.

Simon

axgt_bwaii

iTrader: (6)

will check this tomorrow afternoon. cheers. i hope thats all it is even though i have bought new bilstein dampers to build up all new suspension.

axgt_bwaii

iTrader: (6)

spacer was and is seated proplerly.

what position should i have the top cup in? anyone know? its driving me up the wall.

spring is twanging and making a nasty noise as it moves.

slipstream_uk

iTrader: (1)

axgt_bwaii

iTrader: (6)

your a star thanks for taking the time for that^^

only woe is thats how ive fit them. im considering that the 3 yr od hks springs are or hav gone faulty. or the rubber hat on top of the spring is assisting it to turn?

axgt_bwaii

iTrader: (6)

sorted it. cv joint shatterd to bits

lucky i carry spares