Wanted-Geometry settings.
#1
Scooby Regular
Thread Starter
Join Date: Mar 2007
Location: In a world of my own.
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Wanted-Geometry settings.
Can anyone supply me with the geometry settings for a MY04 JDM Spec-C. I am just after the settings for fast road not for track. Thanks
#3
Scooby Regular
iTrader: (4)
Join Date: Jan 2005
Location: Devon
Posts: 736
Likes: 0
Received 0 Likes
on
0 Posts
MY03 JDM Spec C
I have just had mine 4 wheel alligned.
Front Caster was 4 degrees
Front Camber was just over -0.5 degrees (maximum they could get on the standard camber bolts)
Toe was set to 0
rear camber was -0 degrees 50 minutes
Rear toe was set to 0
Hope this helps. Took it on a track day Friday just gone and seemed quite tail happy, so will probably get some uprated mounts or camber bolts and dial in some more camber.
There are numerour thread currently running - one of which is titled "camber bolts" i think. This discusses this quite a bit.
Also as rich says - 911 seems to be the person in the know when it comes to suspension.
Cheers
I have just had mine 4 wheel alligned.
Front Caster was 4 degrees
Front Camber was just over -0.5 degrees (maximum they could get on the standard camber bolts)
Toe was set to 0
rear camber was -0 degrees 50 minutes
Rear toe was set to 0
Hope this helps. Took it on a track day Friday just gone and seemed quite tail happy, so will probably get some uprated mounts or camber bolts and dial in some more camber.
There are numerour thread currently running - one of which is titled "camber bolts" i think. This discusses this quite a bit.
Also as rich says - 911 seems to be the person in the know when it comes to suspension.
Cheers
Last edited by mbayley77; 28 April 2008 at 07:19 PM. Reason: forgot model of car!
Thread
Thread Starter
Forum
Replies
Last Post
DazV
Computer & Technology Related
8
16 June 2003 12:57 PM