Rear Strut Brace for Wagon
#1
I'm after a rear strut brace for a MY00 wagon. I've search the posts and picked up on the STi, whiteline and Cusco. Does anyone know if these (exception to STi - is it a really 5DR brace PTMW?) or any others will fit with the rear roll-cover or whatever it is on....silly plastic blind
If they do can anyone point into the direction of suppliers, preferably in the UK.
Thanks in advance
Ian
If they do can anyone point into the direction of suppliers, preferably in the UK.
Thanks in advance
Ian
#4
Thanks D and D. Where did you buy the Cusco one from, is it the 2-point or 3-point brace?
Are they easy to fit or do I need the geometry set-up as well?
Thanks in advance
Ian
Are they easy to fit or do I need the geometry set-up as well?
Thanks in advance
Ian
#5
Scooby Regular
I fitted one on my 4 dr. Didn't get the geom done, but some say it should be. (if you don't load up the brace and move the towers you haven't changed the goem.)IMO
I got mine in For sale.
But you could call:
-RC Developments: 01606 78606 www.rcdevelopments.com
-Option motorsport: 01327 858555
It really does stiffen the rear up
Hope that helps,
Iain.
I got mine in For sale.
But you could call:
-RC Developments: 01606 78606 www.rcdevelopments.com
-Option motorsport: 01327 858555
It really does stiffen the rear up
Hope that helps,
Iain.
#6
Cusco on a 00MY 5Dr.....big improvement.
You need to cut the plastic top-caps, on-top of the suspension turrets...
Loadcover works fine.
Comes in two parts - bar accross the top of the turrets. Second Y-piece bolts to this and the floor of the boot!!!!!!!!
I`ve only got the bar at the mo.......not cheap though!
You need to cut the plastic top-caps, on-top of the suspension turrets...
Loadcover works fine.
Comes in two parts - bar accross the top of the turrets. Second Y-piece bolts to this and the floor of the boot!!!!!!!!
I`ve only got the bar at the mo.......not cheap though!
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM