Avcs Cylinder Heads small port and Big port
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2011
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Avcs Big port heads
I now need to keep the solenoids and covers from my old heads so only the Big port heads as they are are available now
I'd originally brought these to strip them down and use the shells but had already sourced a set of big port heads before i realised what these were
Missing one head cover and have no pulleys
some minor imperfections on one head face can be seen in photo's which could do with skimming out
£200 buys them
Crackless heads
markings on crackless heads
Damaged avcs on spare heads
I'd originally brought these to strip them down and use the shells but had already sourced a set of big port heads before i realised what these were
Missing one head cover and have no pulleys
some minor imperfections on one head face can be seen in photo's which could do with skimming out
£200 buys them
Crackless heads
markings on crackless heads
Damaged avcs on spare heads
Last edited by Tomma4836; 30 August 2012 at 07:50 PM. Reason: Info update
#2
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2011
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
After doing a lot of digging it turns out that the spare heads with no cracks are actually Big Port heads. LHS20V and RHS20V marked on the casings, more pictures added to show comparison between replacement heads and the heads I had on the car.
£200 for these is a very fair price. I had already sourced some replacement Big Port heads before I realised what these were which is why I am not keeping them.
No I didn't use a smaller socket for the next two photos!!
Big Port
Small port
£200 for these is a very fair price. I had already sourced some replacement Big Port heads before I realised what these were which is why I am not keeping them.
No I didn't use a smaller socket for the next two photos!!
Big Port
Small port
Last edited by Tomma4836; 30 August 2012 at 07:46 PM.
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Apr 2011
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I do have pulleys from my original heads but haven't decided whether to buy some CDF ones yet.....
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM