Tial Q BOV Dump Valve Brand New Boxed
#1
Scooby Regular
Thread Starter
iTrader: (16)
Join Date: Jan 2010
Location: In Paradise
Posts: 3,097
Likes: 0
Received 0 Likes
on
0 Posts
Tial Q BOV Dump Valve Brand New Boxed
This stunning bov comes with a 11 psi spring.
I am looking for £175 plus p&p
TiAL :: Products :: Blowoff Valves::Q BOV
- For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
- An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless Steel is available at an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors.
- Through countless hours of R&D we were able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market.
What's Inside the Box
Included with Every Q BOV:
Q BOV Assembly
TiAL V-Band Clamp
V-Band Weld Flange
High Pressure O-Ring
TiAL Air Fitting
Available Finishes
Silver
Black
Red
Blue
Purple
Spring Pressures
Selecting BOV Springs
Flange Materials
Aluminum
304L Stainless Steel
1018 Steel
Documents
Spring Pressures Q Bov
Installation Diagram
Technical Drawing
I am looking for £175 plus p&p
TiAL :: Products :: Blowoff Valves::Q BOV
- For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
- An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless Steel is available at an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors.
- Through countless hours of R&D we were able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market.
What's Inside the Box
Included with Every Q BOV:
Q BOV Assembly
TiAL V-Band Clamp
V-Band Weld Flange
High Pressure O-Ring
TiAL Air Fitting
Available Finishes
Silver
Black
Red
Blue
Purple
Spring Pressures
Selecting BOV Springs
Flange Materials
Aluminum
304L Stainless Steel
1018 Steel
Documents
Spring Pressures Q Bov
Installation Diagram
Technical Drawing
Last edited by EH52WRX; 06 July 2011 at 12:13 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM