how to apply graphics properly..do yo uneed soapy liquid or do it dry ??
#1
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: sunshine coast, queensland ! hot hot hot !
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
my graphics have arrived and i have done the door boxes. is it best to spray the panel with soapy solution before application so as to get all the bubbles out ? or do it dry ? any help on this would be appreciated..
#4
Scooby Regular
Join Date: Dec 2002
Location: Couch Spud
Posts: 9,277
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I used plenty of water with a very tiny amount of fairy liquid, soak the panel on the car, and soak the back of the vinyl (the sticky side)
this will allow the vinyl to be moved around for a while, in case you line it up wrong, you can use an old credit card to smooth the bubbles out, but I got a proper smoothing pad from my supplier
this will allow the vinyl to be moved around for a while, in case you line it up wrong, you can use an old credit card to smooth the bubbles out, but I got a proper smoothing pad from my supplier
![Smile](https://www.scoobynet.com/images/smilies/smile.gif)
#6
Scooby Regular
Join Date: Nov 2006
Location: Fermanagh/Tyrone
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
#7
Scooby Regular
Join Date: Dec 2006
Location: milton keynes
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
double polish the car first too
incase you change your mind at a later date, then they will come off so much easier, i recently took the 555 graphics kit off mine, it was a nightmare, and damaged the laqcuer in places
just a thought mate
incase you change your mind at a later date, then they will come off so much easier, i recently took the 555 graphics kit off mine, it was a nightmare, and damaged the laqcuer in places
just a thought mate
Trending Topics
#8
Scooby Regular
Join Date: Oct 2005
Location: Scoobyless..In fact carless :(
Posts: 1,386
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I done all mine (except large swooshes) used the wet method. The guy who done the swooshes installed them dry. Think it would take a bit of practice dry as you don't get the oppotunity to retry or move them....
#9
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I did the whole graphics on my old wrx and used the soapy water method, the company i got the graphics from gave me a squeegy thing with the graphics to rub the air holes out.
Just make sure you give it time to dry after putting them on and peeling them, be patient or you'll find the graphics will come away with the backing, also make sure they have completley dried out before driving at speed as you wouldnt want to see them flying off in your mirror!!
Just make sure you give it time to dry after putting them on and peeling them, be patient or you'll find the graphics will come away with the backing, also make sure they have completley dried out before driving at speed as you wouldnt want to see them flying off in your mirror!!
#10
Scooby Regular
Join Date: Oct 2006
Location: I will be the one in front !!!! - www.scoobysmacs.co.uk
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I did all mine apart from main side swoosh. Did dry method but as has been said if you go dry make sure you line them up right as you cant move them. Good luck but its well worth it.
![Thumb](https://www.scoobynet.com/images/smilies/thumb.gif)
#13
Scooby Regular
Join Date: Dec 2002
Location: Couch Spud
Posts: 9,277
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I found it best to actually soak the stickers thoroughly and the car panels with a misting spray (B & Q 99p
![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
Thread
Thread Starter
Forum
Replies
Last Post
gazzawrx
Non Car Related Items For sale
13
17 October 2015 06:51 PM
An0n0m0us
Computer & Technology Related
0
28 September 2015 09:58 PM