High lev spoiler for 05 WRX
#1
Scooby Newbie
Thread Starter
Join Date: Apr 2006
Location: Portsmouth
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
High lev spoiler for 05 WRX
I am after a high level spoiler for my 05 WRX, have seen them on the scoobtworld website. Can anyone suggest a good spoiler to give the sti look, with no drilling - just a replacement for the old one?
#3
Is the Spolier Secure tho only using 4 holes on there spoliers, surely when they made the impreza 4 wasnt good enough so thats why they use more on the sti boot.
I was looking into getting one as well
I was looking into getting one as well
#4
Scooby Regular
Join Date: Feb 2006
Location: oot n aboot
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
How about one of these?
They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300.
I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you.
Gus
They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300.
I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you.
Gus
Last edited by Gus the Bus; 01 May 2006 at 04:25 PM.
#6
To answer your question, the STi replica ones we supply do not need extra holes drilled.
They fit using the 4 holes from the WRX bootlid plus 3M tape that gives extra hold and acts as a foam cushion between spoiler and bootlid.
We've supplied hundreds of these now, with no problems.
Our STi ones also have a clear LED brake light in the BOTTOM section - same as the genuine ones.
Not a red light, or a red light in the top section.
That's always the main give away that it's a replica.
David
They fit using the 4 holes from the WRX bootlid plus 3M tape that gives extra hold and acts as a foam cushion between spoiler and bootlid.
We've supplied hundreds of these now, with no problems.
Our STi ones also have a clear LED brake light in the BOTTOM section - same as the genuine ones.
Not a red light, or a red light in the top section.
That's always the main give away that it's a replica.
David
Last edited by DR Motorsport; 04 May 2006 at 12:21 AM.
Trending Topics
#11
When you remove the WRX spoiler, you shouldn't have any sticky foam left. But you will have a grime line around the mounting area.
Just make sure you give it a good clean, and make sure it's dry before fitting any new spoiler.
David
Just make sure you give it a good clean, and make sure it's dry before fitting any new spoiler.
David
#12
Originally Posted by Gus the Bus
How about one of these?
They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300.
I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you.
Gus
They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300.
I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you.
Gus
Thats nice how much inc P+P or painted and fitting ?
#14
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM