High lev spoiler for 05 WRX
I am after a high level spoiler for my 05 WRX, have seen them on the scoobtworld website. Can anyone suggest a good spoiler to give the sti look, with no drilling - just a replacement for the old one?
|
DRMotorsport, speak to David.
|
Is the Spolier Secure tho only using 4 holes on there spoliers, surely when they made the impreza 4 wasnt good enough so thats why they use more on the sti boot.
I was looking into getting one as well |
How about one of these?
http://i18.photobucket.com/albums/b1...e/spoiler3.jpg http://i18.photobucket.com/albums/b1...e/spoiler2.jpg They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300. I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you. Gus |
Is that Secure tho dude, as the Other sti ones say that all extra holes are needed.
Whats the Cost of one of them? |
To answer your question, the STi replica ones we supply do not need extra holes drilled.
They fit using the 4 holes from the WRX bootlid plus 3M tape that gives extra hold and acts as a foam cushion between spoiler and bootlid. We've supplied hundreds of these now, with no problems. Our STi ones also have a clear LED brake light in the BOTTOM section - same as the genuine ones. Not a red light, or a red light in the top section. That's always the main give away that it's a replica. David |
Cheers David. I may Look in to buying one from you then if it fits the same holes.
Wayne |
I have bought four spoilers from David for mine and some friends, they are very good quality and fitting!
|
Cheers Jim, ill get one orderd i think, not sure which one to go for,
|
IS a mess left when the old WRX spolier is taken off all sticky Crap ?, it has to be clean to fit the new one.
|
When you remove the WRX spoiler, you shouldn't have any sticky foam left. But you will have a grime line around the mounting area.
Just make sure you give it a good clean, and make sure it's dry before fitting any new spoiler. David |
Originally Posted by Gus the Bus
How about one of these?
http://i18.photobucket.com/albums/b1...e/spoiler3.jpg http://i18.photobucket.com/albums/b1...e/spoiler2.jpg They fit the standard WRX holes with no extra drilling etc.... as fitted to my WRX300. I have fitted 5 of these now with no problems and can get these from a local supplier either painted or primer based and could get carriage to you. Gus Thats nice how much inc P+P or painted and fitting ? |
I've Pm'd you regarding spoiler st3v3
|
|
All times are GMT +1. The time now is 06:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands