Turbo Scoop
17 December 2003, 12:48 AM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Does any one know who supples the bonnet scoop to cool the turbo(left side as you look at the car) seen one on a scoob from Isle Of White in Banzi mag looked good and practical too.
17 December 2003, 06:54 PM
#4
Scooby Regular
Join Date: Feb 2000
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Something like this?
if so click me!
Jap-innovations are listed as an MRT vendor/dealer.
MRT makes a nice alloy vent scoop as shown...
if indeed this is what you're after...
Jamie
www.subiegal.com
if so click me!
Jap-innovations are listed as an MRT vendor/dealer.
MRT makes a nice alloy vent scoop as shown...
if indeed this is what you're after...
Jamie
www.subiegal.com
17 December 2003, 07:37 PM
#5
Scooby Regular
Join Date: Mar 2003
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
oh NO don't say techno petes copying ets stuff again, is that what he meant when he said he was developing something 
heres the ets ones, they've all got the reverse scoop underneath,
heres the ets ones, they've all got the reverse scoop underneath,
17 December 2003, 07:46 PM
#6
Scooby Regular
Join Date: Oct 2002
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
whys the middle one blanked up 
i got a scoop from ets about five months ago, it looks the biz
the scoop bit under the bonnet, is a something i didn't expect when i bought mine,i would recomend them. and it was only £45 Delivered to my door,
i got a scoop from ets about five months ago, it looks the biz
the scoop bit under the bonnet, is a something i didn't expect when i bought mine,i would recomend them. and it was only £45 Delivered to my door,
17 December 2003, 11:04 PM
#7
Scooby Regular
iTrader: (3)
Join Date: Jan 2003
Location: South Wales - Stuck on this rollercoaster, get me off!!
Posts: 5,350
Likes: 0
Received 0 Likes
on
0 Posts
I thought their purpose was to act as a direct feed of air, to an induction kit.
Anyway, try Scoobymania they can supply you with the alloy scoop.
simb
Anyway, try Scoobymania they can supply you with the alloy scoop.
simb
Trending Topics
18 December 2003, 09:43 AM
#11
Scooby Regular
Join Date: Mar 2003
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
Warwick - hunt
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO)
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO)
18 December 2003, 11:48 AM
#12
Scooby Regular
Join Date: Jun 2002
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
whys the middle one blanked up
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO)
i'm the only one to make these for the 95 bonnet, i've got another two different styles gettng moulded now , one for the 99 so that will make 4 different style in total and another for the 95,
if petes are so good put a picture on and let everyone see the choices availables.
18 December 2003, 11:57 AM
#14
Scooby Regular
Join Date: Mar 2003
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Warwick - hunt
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO)
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO)
just last week techno pete only made a grill and a few interior parts, now in a week hes developed a scoop with out a "restrictive reverse scoop" what does it restrict? its not bull from a scoobylav
18 December 2003, 12:42 PM
#15
Scooby Regular
Join Date: Oct 2003
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
the reverse scoop feed's the air to the filter,the filter is not directly under the vent hole (near it)so it's helping to direct the air to it ,but if you do not want the bottom scoop on do what i did and cut it off or can you not use a hacksaw,but least i have choice not like the mrt one
18 December 2003, 01:06 PM
#16
Scooby Regular
Join Date: Mar 2003
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
what a tosser,
just last week techno pete only made a grill and a few interior parts, now in a week hes developed a scoop with out a "restrictive reverse scoop" what does it restrict? its not bull from a scoobylav
DJ73 - My filter is directly under the vent therefore I didn't want one with the bit underneath. So naturally purchased one without. Also yes, I can use a hacksaw when the need arises.
18 December 2003, 01:58 PM
#17
Scooby Regular
Join Date: Mar 2003
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Fundimental - Not having a pop at yours merely defending a potentially libellous comment.
You obviously have no idea what Pete does !!
18 December 2003, 02:03 PM
#19
Scooby Regular
Join Date: Mar 2003
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
oops
can you now defend this potentially libellous comment? again
Petes don't look too much like these thankfully. They don't have the restrictive "reverse scoop" on them that negates the purpose of the scoop in the first place. (IMHO) .
18 December 2003, 07:16 PM
#22
Scooby Regular
Join Date: Jun 2002
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
heres some of the scoops i'm busy doing at the minute,
the first one is for the 95 bonnet, its not quite ready yet but you can get the idea of the style
the other beige one has been made for the 99 bonnet and is slightly higher and more rounded on the top than the one on donutmans car, on the 1st page of this thread. both will have a raised STI logo on when finished.
the white one someone send me last week to make a mould for them,
it has the prodrive logo on the top, its very similar to mine and i think it was styled on mine, he got it from abroad and i sold 10 scoops to the same company two months ago,
i don't want to put prodrive on my scoops but on these two new ones i will be putting a sti logo on.
if anyone has a new design and wants it made send me a picture and i'll make it
the first one is for the 95 bonnet, its not quite ready yet but you can get the idea of the style
the other beige one has been made for the 99 bonnet and is slightly higher and more rounded on the top than the one on donutmans car, on the 1st page of this thread. both will have a raised STI logo on when finished.
the white one someone send me last week to make a mould for them,
it has the prodrive logo on the top, its very similar to mine and i think it was styled on mine, he got it from abroad and i sold 10 scoops to the same company two months ago,
i don't want to put prodrive on my scoops but on these two new ones i will be putting a sti logo on.
if anyone has a new design and wants it made send me a picture and i'll make it
18 December 2003, 07:35 PM
#23
Scooby Regular
Join Date: Oct 2002
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
nice job fundi,
i hadn't seen donutmans car the other night when i put my post on, i must have scrolled past it, i wasn't having a go like scoobylav, (IMHO)
lol at your comment
defending a potentially libellous comment by making your own. your not a solicitor are you, thats not a question BTW
i think ets and mro are real assets to scoobynet as you are the only manufacturers who make a lot of new designs from scratch,
scoobylav how much was your scoop, can you put a picture on, and can you open the bonnet to let us see underneath, also can anyone put a picture on, with the bonnet up with a mrt one fitted,
i hadn't seen donutmans car the other night when i put my post on, i must have scrolled past it, i wasn't having a go like scoobylav,
(IMHO) lol at your comment
Not having a pop at yours merely defending a potentially libellous comment.
i think ets and mro are real assets to scoobynet as you are the only manufacturers who make a lot of new designs from scratch,
scoobylav how much was your scoop, can you put a picture on, and can you open the bonnet to let us see underneath, also can anyone put a picture on, with the bonnet up with a mrt one fitted,
19 December 2003, 07:13 PM
#26
Scooby Regular
Join Date: Jun 2002
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
oi stuart i didn't know you've started doing the pre 96 ones,
i'll change my original statement to "i was the first one to make these for the 95 bonnet",
if anyone reading has a pre 96 bonnet, damaged or not, let me know, i'm going to make a higher centre scoop next.
i didn't know you've started doing the pre 96 ones, i'll change my original statement to "i was the first one to make these for the 95 bonnet",
if anyone reading has a pre 96 bonnet, damaged or not, let me know, i'm going to make a higher centre scoop next.
19 December 2003, 11:43 PM
#27
Scooby Regular
iTrader: (2)
Join Date: Jan 1998
Location: Nr. High Wycombe, Bucks
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Fundi,
I'll have to dispute that one as well, as I've been doing mine for years now, started with my own car about 3 1/2 years ago, then started making them for other people when they asked. I did my own cos MRT were only doing ones for 97 onwards and I have a my94 WRX
Stuart
I'll have to dispute that one as well, as I've been doing mine for years now, started with my own car about 3 1/2 years ago, then started making them for other people when they asked. I did my own cos MRT were only doing ones for 97 onwards and I have a my94 WRX
Stuart
20 December 2003, 12:28 PM
#29
Scooby Regular
Join Date: Jun 2002
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
cheers stuart,
i think its good that theres a few places making different style scoops, it gives people more options,
as far as who done them first, it doesn't matter, i only put my comments on in response to scoobylav, who was trying to put my parts down so he could promote his friend techno pete,
happy christmas
i think its good that theres a few places making different style scoops, it gives people more options,
as far as who done them first, it doesn't matter, i only put my comments on in response to scoobylav, who was trying to put my parts down so he could promote his friend techno pete,
happy christmas
20 December 2003, 12:44 PM
#30
Scooby Newbie
Join Date: Nov 2002
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Fundi,
I'll have to dispute that one as well
I'll have to dispute that one as well
i bought a scoop for my car from derek in 95, it didn't have the scoop underneath but i know the year as a month after i got my scoop and splitter painted i moved to australia for a year to nurse over there, i never got to go in my scooby for a year
