Subaru Impreza GC8 struts any condition
#31
Scooby Regular
iTrader: (3)
Koni recommends measuring down, from the top of the strut, for the cut-off distance. Their measurements can leave very little overlap between their rubber cover and the metal strut body - because of variations in strut body design.
I use the following measurements (they only apply to classics):
Front - 98mm from the floor of the spring perch, up to the cut-off point.
Rear - 72mm from the floor of the spring perch, up to the cut-off point.
I use the following measurements (they only apply to classics):
Front - 98mm from the floor of the spring perch, up to the cut-off point.
Rear - 72mm from the floor of the spring perch, up to the cut-off point.
Last edited by 2pot; 05 April 2018 at 12:25 PM.
#32
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Cheers 2pot!
You are a legend
I have been looking at the email you sent along with the springs, im making a little list of parts I may aswell refresh at the same time.
I cant wait until they are on and settled
You are a legend
I have been looking at the email you sent along with the springs, im making a little list of parts I may aswell refresh at the same time.
I cant wait until they are on and settled
#34
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I think from looking at the reference pics 2pot posted on the previous page that the struts were the wrong kind.
Ive uploaded some pics from my phone that are not showing for me on my pc at the moment, the koni inserts are too small and just slot straight in.
Gutted.
Ive uploaded some pics from my phone that are not showing for me on my pc at the moment, the koni inserts are too small and just slot straight in.
Gutted.
#39
Scooby Regular
iTrader: (9)
Hopefully you can sort this mate,does this mean they're the wrong struts?
There's a good thread from 2pot here,you probably seen it and it's newage but might be of help?
https://www.scoobynet.com/suspension...i-inserts.html
There's a good thread from 2pot here,you probably seen it and it's newage but might be of help?
https://www.scoobynet.com/suspension...i-inserts.html
#41
Scooby Regular
iTrader: (3)
The 8610-1351 front kit should also come with 15mm deep reducers.
These get tapped into position, at the top of the housing, ONLY IF your particular front housing internal diameter is too big, for the 3 locating lugs on the insert.
Are the rear housings too large or just the fronts?
What numbers are stamped into the tubular struts housings?
Reducer, before being tapped into position
These get tapped into position, at the top of the housing, ONLY IF your particular front housing internal diameter is too big, for the 3 locating lugs on the insert.
Are the rear housings too large or just the fronts?
What numbers are stamped into the tubular struts housings?
Reducer, before being tapped into position
Last edited by 2pot; 15 April 2018 at 10:23 AM.
#42
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply guys! Ive just got back in and am heading into the garage now. I dont remember seeing reducers in the box, BUT... i wasnt looking for them, i had only seen the koni video on youtube and written guidelines where no one mentioned reducers.
Rich, even if they are the wrong struts i dont want a refund, thank you ever so much for offering!
The price was fair and included the whiteline top mounts and springs, and the onus was completely on me to check what i was buying was correct 😂
Thank you tho, i really appreciate the thought!
Heres hoping i find reducers and the back inserts fit!
Rich, even if they are the wrong struts i dont want a refund, thank you ever so much for offering!
The price was fair and included the whiteline top mounts and springs, and the onus was completely on me to check what i was buying was correct 😂
Thank you tho, i really appreciate the thought!
Heres hoping i find reducers and the back inserts fit!
#44
Scooby Regular
iTrader: (2)
Join Date: Jun 2016
Location: Shrewsbury
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Just to say all is well! Found a bag with some reducers in and everything fits!
the back struts are thinner and the konis dont need a reducer!
Thanks for the help guys!
I was really tired last night and just went straight into panic stations lol, i felt my world collapse 😂
Back to cleaning and degreasing now 👍
Thanks again!
the back struts are thinner and the konis dont need a reducer!
Thanks for the help guys!
I was really tired last night and just went straight into panic stations lol, i felt my world collapse 😂
Back to cleaning and degreasing now 👍
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post