Headlight activation on concept 500
#1
I need to know how to change the settings for headlight activation on a concept 500. I have a relay for the headlights and from the fob it activates them and lasts 10 seconds. I need to change how long they on for. How can i do this, have tried via cliffnet wizard, but been told that as its a consumer version not a installers i cannot do it. Dont want to take it to a dealer and be charged for 5 mins work, thanks guys,
#3
will have a look at work tomorrow and get back to you, cant remember of the top of me head. If you take it to whoever fitted it they shouldn't really charge you,( I wouldnt ) as you say its only a few mins to do.
#4
thanks for checking 2mrow, thing is person that installed it is about 2hrs away, and yes i did drive the extra to find a good installer. Just would be great if i could do it myself rather than driving all that way m8.
#5
Pay attention, here we go.
Enter your valet code, after you enter the last number and you push the blank button, immedietley push and hold the 'star' button (the LED should be on)
After about 5 seconds you will get on beep from the siren, continue to hold the button for a further 5 seconds, you will get three beeps, let go of the button. You are now in installer programming.
To change your timed output-
* push the blank button twice, wait a couple of seconds and you will get two beeps
* push the star button once, you will get one beep as you push the button. v. shortly after that you will get another single beep, this is the start of the timer so you you simply time from that beep until you desired time has elapsed.
* when the time is up push the blank button, you get two confirmation beeps
* turn ignition off, job done.
PLEASE NOTE THAT CHANGING SOME INSTALLER SETTINGS MAY DO DAMAGE TO YOUR ALARM AND/OR CAR SO BE CAREFULL.
Enter your valet code, after you enter the last number and you push the blank button, immedietley push and hold the 'star' button (the LED should be on)
After about 5 seconds you will get on beep from the siren, continue to hold the button for a further 5 seconds, you will get three beeps, let go of the button. You are now in installer programming.
To change your timed output-
* push the blank button twice, wait a couple of seconds and you will get two beeps
* push the star button once, you will get one beep as you push the button. v. shortly after that you will get another single beep, this is the start of the timer so you you simply time from that beep until you desired time has elapsed.
* when the time is up push the blank button, you get two confirmation beeps
* turn ignition off, job done.
PLEASE NOTE THAT CHANGING SOME INSTALLER SETTINGS MAY DO DAMAGE TO YOUR ALARM AND/OR CAR SO BE CAREFULL.
#7
worked a treat m8,
off the topic, as you seem a installer do you know if the uk have g5's yet? I am after the new blue led that comes with the new G5 series, as its on the clifford us site, not uk. Cheers.
off the topic, as you seem a installer do you know if the uk have g5's yet? I am after the new blue led that comes with the new G5 series, as its on the clifford us site, not uk. Cheers.
Trending Topics
#8
Only the Arrow 5 is available at the moment, more to follow in about 3/4 weeks, and cat 1 alarms after that. Clifford do a blue LED but it is not the G5 one, these are not available yet.
#10
The little black surround with 'Clifford' on it is not fixed to the LED, The blue LED available at the mo is not the same size. It will go through the hole and stay in place with a dab of glue on the back. To be honest wait for the proper G5 ones to become available.
Thread
Thread Starter
Forum
Replies
Last Post